2009/9/15 sanyanniesunney anniesunney <[email protected]>:
> mmc0: new high speed SD card at address b368
> mmcblk0: mmc0:b368 SDC 970 MiB
> mmcblk0: p1
> Welcome to 0xdroid Image Installer
>
It looks that SD card was about to be mounted.
> Mounting SD card...
> mount: mounting /dev/mmcblk0p1 on /mmcblk0p1 failed: Device or resource busy
> Press [Enter] to activate shell
> Erase NAND flash (File System)
> Input file is not page-aligned. Use the padding option.
> Data was only partially written due to error
> : Success
> /write_flash: exit: line 14: Illegal number: -1
> Writing android-beagle.ubi into NAND flash...
>
Thanks for your report. We at 0xlab mainly tested on Beagleboard rev
C2. Few rev B? series were partially tested.
To help you know about the details, I think you should have more
background knowledge about Beagleboard and Linux. Ångström is a good
start point:
http://www.angstrom-distribution.org/
Of course, Beagleboard website:
http://beagleboard.org/
Since the list is regarding android pointing, we ought to focus on
porting itself.
Sincerely,
Jim Huang (jserv)
http://0xlab.org/
--~--~---------~--~----~------------~-------~--~----~
unsubscribe: [email protected]
website: http://groups.google.com/group/android-porting
-~----------~----~----~----~------~----~------~--~---
