Sir , I tried procedure mentioned in http://code.google.com/p/rowboat/wiki/ConfigureAndBuild. Then i got terminal window shown in below.In that procedure i didn't use saveenv command In my previous attempt i use it,the result was same.I got message resetting ,i wait for almost 2 hour but there is nochange in terminal.
OMAP3530-GP ES3.0, CPU-OPP2 L3-165MHz OMAP3 Beagle board + LPDDR/NAND DRAM: 128 MB NAND: 256 MiB In: serial Out: serial Err: serial Board revision Ax/Bx Die ID #5ac400030000000004013f8901001001 Hit any key to stop autoboot: 0 OMAP3 beagleboard.org # OMAP3 beagleboard.org # mmc init mmc1 is available OMAP3 beagleboard.org # mmc1 is available OMAP3 beagleboard.org # setenv bootcmd 'mmc init;fatload mmc 1 80200000 uImage; bootm 80200000' OMAP3 beagleboard.org # Unknown command '' - try 'help' OMAP3 beagleboard.org # setenv bootargs 'mem=128M androidboot.console=ttyS2 console=tty0 console=ttyS2,115200n8 root=/ dev/mmcblk0p1 rw init=/init rootwait omapfb.viedo_mode=640x480mr...@60' OMAP3 beagleboard.org # reset resetting ... thanking advance with regards Ajish Zacharias(CAIR,DRDO) -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting To unsubscribe, reply using "remove me" as the subject.
