No, the logs indicate it did mount the filesystem, then failed later. Might want to try a different hub / try that hub and storage device on a desktop linux box while stress testing it somehow.
Srikant wrote: > Check this from the logs: > init: cannot find '/system/bin/mountd', disabling 'mountd' > > It's not able to mount the USB device, as mount daemon is not found/ > disabled > > - > > On Sep 14, 6:44 pm, PREMRAJ SV <[email protected]> wrote: > > Hello all, > > I was trying to connect gsm modem to Android. Using USB Hub for > > connecting gsm modem via serail to usb convertor. I have enabled kernel > > configuration for usb gsm modem support. While booting the filesystem is > > loaded and after sometime it gets remounted saying that there is filesystem > > error in entry.. I have already posted similar post for ttyUSB) not > > detected. Trying again once got this error. My log from cutecom are, > > ------------------------------------i-------------------------------------------------------------------------------------- > > > > Starting kernel ... > > > > Linux version 2.6.32-rc6 (r...@prem-laptop) (gcc version 4.3.2 (Sourcery G++ > > Lite 2008q3-72) ) #20 PREEMPT Tue Sep 14 18:03:51 IST 2010 > > CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 > > CPU: VIVT data cache, VIVT instruction cache > > Machine: OMAPL 138 Hawkboard.org > > Memory policy: ECC disabled, Data cache writeback > > DaVinci da850/omap-l138 variant 0x0 > > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 > > Kernel command line: console=ttyS2,115200n8 noinitrd root=/dev/sda1 > > video=omapfb.mode=dvi:1280*1280...@60 androidboot.console=ttyS2 rootwait rw > > init=/init > > Unknown boot option `androidboot.console=ttyS2': ignoring > > PID hash table entries: 512 (order: -1, 2048 bytes) > > Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) > > Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) > > Memory: 128MB = 128MB total > > Memory: 124344KB available (4460K code, 816K data, 148K init, 0K highmem) > > SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > > Hierarchical RCU implementation. > > NR_IRQS:245 > > Console: colour dummy device 80x30 > > Calibrating delay loop... 149.50 BogoMIPS (lpj=747520) > > Mount-cache hash table entries: 512 > > CPU: Testing write buffer coherency: ok > > DaVinci: 144 gpio irqs > > regulator: core version 0.5 > > NET: Registered protocol family 16 > > bio: create slab <bio-0> at 0 > > SCSI subsystem initialized > > usbcore: registered new interface driver usbfs > > usbcore: registered new interface driver hub > > usbcore: registered new device driver usb > > Switching to clocksource timer0_1 > > musb_hdrc: version 6.0, cppi4.1-dma, (host+peripheral), debug=0 > > Waiting for USB PHY clock good... > > musb_hdrc: USB OTG mode controller at fee00000 using DMA, IRQ 58 > > musb_hdrc musb_hdrc: MUSB HDRC host driver > > musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1 > > usb usb1: configuration #1 chosen from 1 choice > > hub 1-0:1.0: USB hub found > > hub 1-0:1.0: 1 port detected > > NET: Registered protocol family 2 > > IP route cache hash table entries: 1024 (order: 0, 4096 bytes) > > TCP established hash table entries: 4096 (order: 3, 32768 bytes) > > TCP bind hash table entries: 4096 (order: 2, 16384 bytes) > > TCP: Hash tables configured (established 4096 bind 4096) > > TCP reno registered > > NET: Registered protocol family 1 > > RPC: Registered udp transport module. > > RPC: Registered tcp transport module. > > RPC: Registered tcp NFSv4.1 backchannel transport module. > > ashmem: initialized > > Installing knfsd (copyright (C) 1996 [email protected]). > > JFFS2 version 2.2. (NAND) \0xc2\0xa9 2001-2006 Red Hat, Inc. > > msgmni has been set to 243 > > alg: No test for stdrng (krng) > > io scheduler noop registered > > io scheduler anticipatory registered (default) > > da8xx_lcdc da8xx_lcdc.0: GLCD: Found VGA_Monitor panel > > Console: switching to colour frame buffer device 80x30 > > Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled > > serial8250.0: ttyS0 at MMIO 0x1c42000 (irq = 25) is a 16550A > > serial8250.0: ttyS1 at MMIO 0x1d0c000 (irq = 53) is a 16550A > > serial8250.0: ttyS2 at MMIO 0x1d0d000 (irq = 61) is a 16550A > > console [ttyS2] enabled > > brd: module loaded > > loop: module loaded > > Uniform Multi-Platform E-IDE driver > > ide-gd driver 1.18 > > PPP generic driver version 2.4.2 > > PPP Deflate Compression module registered > > PPP BSD Compression module registered > > PPP MPPE Compression module registered > > NET: Registered protocol family 24 > > PPPoL2TP kernel driver, V1.0 > > SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). > > Equalizer2002: Simon Janes ([email protected]) and David S. Miller ( > > [email protected]) > > tun: Universal TUN/TAP device driver, 1.6 > > tun: (C) 1999-2004 Max Krasnyansky <[email protected]> > > console [netcon0] enabled > > netconsole: network logging started > > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > > ohci ohci.0: DA8xx OHCI > > ohci ohci.0: new USB bus registered, assigned bus number 2 > > ohci ohci.0: irq 59, io mem 0x01e25000 > > usb usb2: configuration #1 chosen from 1 choice > > hub 2-0:1.0: USB hub found > > hub 2-0:1.0: 1 port detected > > usbcore: registered new interface driver cdc_acm > > cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN > > adapters > > Initializing USB Mass Storage driver... > > usbcore: registered new interface driver usb-storage > > USB Mass Storage support registered. > > usbcore: registered new interface driver usbserial > > usbserial: USB Serial Driver core > > USB Serial support registered for GSM modem (1-port) > > usbcore: registered new interface driver option > > option: v0.7.2:USB Driver for GSM modems > > g_ether gadget: using random self ethernet address > > g_ether gadget: using random host ethernet address > > usb0: MAC ee:3a:5d:cf:a3:bd > > usb0: HOST MAC 0e:34:ca:a2:00:a8 > > g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 > > g_ether gadget: g_ether ready > > mice: PS/2 mouse device common for all mice > > i2c /dev entries driver > > Linux telephony interface: v1.00 > > ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/none/none/1.1.2.2 > > Modular ISDN core version 1.1.21 > > NET: Registered protocol family 34 > > usbcore: registered new interface driver usbhid > > usbhid: v2.6:USB HID core driver > > logger: created 64K log 'log_main' > > logger: created 256K log 'log_events' > > logger: created 64K log 'log_radio' > > logger: created 64K log 'log_system' > > Advanced Linux Sound Architecture Driver Version 1.0.21. > > ALSA device list: > > No soundcards found. > > TCP cubic registered > > NET: Registered protocol family 17 > > Bridge firewalling registered > > Ebtables v2.0 registered > > davinci_emac_probe: using random MAC addr: 2a:08:de:ec:93:54 > > emac-mii: probed > > Waiting for root device /dev/sda1... > > usb 2-1: new full speed USB device using ohci and address 2 > > usb 2-1: configuration #1 chosen from 1 choice > > hub 2-1:1.0: USB hub found > > hub 2-1:1.0: 4 ports detected > > usb 2-1.2: new full speed USB device using ohci and address 3 > > usb 2-1.2: not running at top speed; connect to a high speed hub > > usb 2-1.2: configuration #1 chosen from 1 choice > > scsi0 : SCSI emulation for USB Mass Storage devices > > usb 2-1.4: new full speed USB device using ohci and address 4 > > usb 2-1.4: configuration #1 chosen from 1 choice > > scsi 0:0:0:0: Direct-Access 0.00 PQ: 0 ANSI: 2 > > sd 0:0:0:0: [sda] 7897088 512-byte logical blocks: (4.04 GB/3.76 GiB) > > sd 0:0:0:0: [sda] Write Protect is off > > sd 0:0:0:0: [sda] Assuming drive cache: write through > > sd 0:0:0:0: [sda] Assuming drive cache: write through > > sda: > > sda1 > > sd 0:0:0:0: [sda] Assuming drive cache: write through > > sd 0:0:0:0: [sda] Attached SCSI removable disk > > usb 2-1.4: USB disconnect, address 4 > > usb 2-1.4: new full speed USB device using ohci and address 5 > > hub 2-1:1.0: unable to enumerate USB device on port 4 > > usb 2-1.4: new full speed USB device using ohci and address 6 > > hub 2-1:1.0: unable to enumerate USB device on port 4 > > usb 2-1.4: new full speed USB device using ohci and address 7 > > hub 2-1:1.0: unable to enumerate USB device on port 4 > > usb 2-1.4: new full speed USB device using ohci and address 8 > > usb 2-1.4: device descriptor read/all, error -62 > > hub 2-1:1.0: unable to enumerate USB device on port 4 > > hub 2-1:1.0: unable to enumerate USB device on port 4 > > usb 2-1.4: new full speed USB device using ohci and address 11 > > usb 2-1.4: configuration #1 chosen from 1 choice > > EXT3-fs warning: maximal mount count reached, running e2fsck is recommended > > kjournald starting. Commit interval 5 seconds > > EXT3 FS on sda1, internal journal > > EXT3-fs: recovery complete. > > EXT3-fs: mounted filesystem with writeback data mode. > > VFS: Mounted root (ext3 filesystem) on device 8:1. > > Freeing init memory: 148K > > Warning: unable to open an initial console. > > init: /init.rc: 119: invalid option 'setprop' > > init: cannot open '/initlogo.rle' > > init: cannot find '/system/bin/mountd', disabling 'mountd' > > init: cannot find '/system/bin/playmp3', disabling 'bootsound' > > init: cannot find '/system/etc/install-recovery.sh', disabling > > 'flash_recovery' > > # ls > > etc > > data > > init > > dev > > sqlite_stmt_journals > > sbin > > cache > > default.prop > > proc > > shared_prefs > > system > > sys > > init.goldfish.rc > > sdcard > > init.rc > > # warning: `app_process' uses 32-bit capabilities (legacy support in use) > > usb 2-1.4: USB disconnect, address 11 > > usb 2-1.4: new full speed USB device using ohci and address 12 > > usb 2-1.4: configuration #1 chosen from 1 choice > > usb 2-1.4: USB disconnect, address 12 > > usb 2-1.4: new full speed USB device using ohci and address 13 > > usb 2-1.4: configuration #1 chosen from 1 choice > > usb 2-1.4: USB disconnect, address 13 > > usb 2-1.4: new full speed USB device using ohci and address 14 > > usb 2-1.4: configuration #1 chosen from 1 choice > > hub 2-1:1.0: hub_port_status failed (err = -62) > > hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling... > > usb 2-1: USB disconnect, address 2 > > hub 2-1:1.0: cannot reset port 2 (err = -62) > > usb 2-1.2: USB disconnect, address 3 > > hub 2-1:1.0: cannot reset port 2 (err = -19) > > hub 2-1:1.0: cannot disable port 2 (err = -19) > > hub 2-1:1.0: cannot disable port 2 (err = -19) > > sd 0:0:0:0: [sda] Unhandled error code > > sd 0:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00 > > sd 0:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 4d 4d 5e 00 00 18 00 > > end_request: I/O error, dev sda, sector 5066078 > > Aborting journal on device sda1. > > ext3_abort called. > > EXT3-fs error (device sda1): ext3_journal_start_sb: > > EXT3-fs error (device sda1): ext3_find_entry: reading directory #183265 > > offset 0 > > Detected aborted journal > > Remounting filesystem read-only > > usb 2-1.4: USB disconnect, address 14 > > EXT3-fs error (device sda1): ext3_find_entry: reading directory #95720 > > offset 0 > > EXT3-fs error (device sda1): ext3_find_entry: reading directory #95617 > > offset 0 > > usb 2-1: new full speed USB device using ohci and address 15 > > usb 2-1: configuration #1 chosen from 1 choice > > hub 2-1:1.0: USB hub found > > hub 2-1:1.0: 4 ports detected > > usb 2-1.2: new full speed USB device using ohci and address 16 > > usb 2-1.2: not running at top speed; connect to a high speed hub > > usb 2-1.2: configuration #1 chosen from 1 choice > > scsi1 : SCSI emulation for USB Mass Storage devices > > usb 2-1.4: new full speed USB device using ohci and address 17 > > usb 2-1.4: configuration #1 chosen from 1 choice > > EXT3-fs error (device sda1): ext3_find_entry: reading directory #143687 > > offset 0 > > EXT3-fs error (device sda1): ext3_find_entry: reading directory #143687 > > offset 0 > > EXT3-fs error (device sda1): ext3_find_entry: reading directory #143687 > > offset 0 > > scsi 1:0:0:0: Direct-Access 0.00 PQ: 0 ANSI: 2 > > sd 1:0:0:0: [sdb] 7897088 512-byte logical blocks: (4.04 GB/3.76 GiB) > > sd 1:0:0:0: [sdb] Write Protect is off > > sd 1:0:0:0: [sdb] Assuming drive cache: write through > > sd 1:0:0:0: [sdb] Assuming drive cache: write through > > sdb: > > sdb1 > > sd 1:0:0:0: [sdb] Assuming drive cache: write through > > sd 1:0:0:0: [sdb] Attached SCSI removable disk > > EXT3-fs error (device sda1): ext3_find_entry: reading directory #95699 > > offset 0 > > ---------------------------------------------------------------------------------------------------------------------------- > > Is that a problem from USB Hub.. -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
