Hi there. Report what dmesg reports when you plug your modem. Usually these modems are detected as a usb2serial port or a ACM0 device, so try to make it done in your linux desktop first.
[]'s Hamilton Vera On Mon, Sep 13, 2010 at 10:41 AM, PREMRAJ SV <[email protected]> wrote: > Hello all, > I am working on connecting gsm modem to hawkboard. > > I am using i-300 modem. > > Compiled the source and ported into board. > > Kernel has all support for usb mass storage, Hub, PPP. > > I use usb hub to load filesystem and serial to usb convertor to connect the > modem. > > After all setup, i have to start pppd to make connection. > > The device must connect to either ttyUSB0 or ttyUSB1. > > There is no such devices in target board after booting. > > In my /dev folder i can see only tty1, tty2.....ttyS1,ttyS2.....no > ttyUSB0.... While connecting the same modem in host, the device is connected > in ttyUSB0. > > How can i proceed further to connect GSM modem...Kindly say me any hint.... > I am posting this more than twice. But no one is helping. Guide me to fix > it. > > Thank you.... > > -- > unsubscribe: [email protected] > website: http://groups.google.com/group/android-porting > -- Hamilton Vera int Administrator (char Network[],char ComputationalSystems[]) http://hvera.wordpress.com -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
