Please could you add some details for the solutions ? Regards On Mar 16, 5:03 am, Hamilton Vera <[email protected]> wrote: > Hi there. > > Make sure that your partition schema and init file are correctly configured. > > []'s > > Hamilton Vera > > On Tue, Mar 15, 2011 at 8:52 AM, Srinivas Yedla <[email protected]> > wrote: > > Hi , > > > Iam trying to bring up the OMAP blaze board(ES 2.1 GP) with > > Gingerbread Android. But while booting the kernel iam repeatedly > > getting the below error and screen is not coming up. > > > Please let me know do i need to add something ? > > > Details of Board used: > > > OS Kernel: Linux® 2.6.35 > > Android: Gingerbread public project > > L27.INC1.GB-ENG-1_OMAP4_GingerBread_ES2 > > Reference hardware platform: Blaze ES2.1-GP > > Build Host OS: Ubuntu > > > Boot args: > > > setenv bootargs console=ttyO2,115200n8 mem=456M@0x80000000 > > mem=512M@0xA0000000 root=/dev/mmcblk1p2 rw rootdelay=2 init=/init > > vram="10M" omapfb.vram="0:4M" > > setenv bootcmd 'mmcinit 0; fatload mmc 0 0x80000000 uImage;bootm > > 80000000' > > saveenv > > run bootcmd > > > LOGS: > > > -------------- > > > Texas Instruments X-Loader 1.41 (Mar 8 2011 - 13:10:38) > > mmc read: Invalid size > > Starting OS Bootloader from MMC/SD1 ... > > > U-Boot 1.1.4-L27.10.2~38 (Mar 8 2011 - 13:10:01) > > > Load address: 0x80e80000 > > DRAM: 1024 MB > > Flash: 0 kB > > In: serial > > Out: serial > > Err: serial > > Net: KS8851SNL > > Hit any key to stop autoboot: 0 > > mmc read: Invalid size > > > 3133700 bytes read > > ## Booting image at 80000000 ... > > Image Name: Linux-2.6.35.7-00166-gd92ad95-di > > Image Type: ARM Linux Kernel Image (uncompressed) > > Data Size: 3133636 Bytes = 3 MB > > Load Address: 80008000 > > Entry Point: 80008000 > > Verifying Checksum ... OK > > OK > > > Starting kernel ... > > > Uncompressing Linux... done, booting the kernel. > > Linux version 2.6.35.7-00166-gd92ad95-dirty (srinivas@sunil-desktop) > > (gcc versio > > n 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #2 SMP PREEMPT Tue Mar 8 > > 15:52:30 IST 2 > > 011 > > CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c53c7f > > CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache > > Machine: OMAP4430 4430SDP board > > Memory policy: ECC disabled, Data cache writealloc > > *********************** > > OMAP4430 ES2.1 type(GP) > > id-code (3b95c02f) > > Die-id (7B8A0003-00000000-0A6CAEA7-03012) > > Prod-id (0001B95C-000300F0) > > *********************** > > SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0x100000 > > FIXME: omap44xx_sram_init not implemented > > Reserving 10485760 bytes SDRAM for VRAM > > PERCPU: Embedded 7 pages/cpu @c192b000 s5568 r8192 d14912 u65536 > > pcpu-alloc: s5568 r8192 d14912 u65536 alloc=16*4096 > > pcpu-alloc: [0] 0 [0] 1 > > Built 1 zonelists in Zone order, mobility grouping on. Total pages: > > 245760 > > Kernel command line: console=ttyO2,115200n8 mem=456M@0x80000000 > > mem=512M@0xA0000 > > 000 root=/dev/mmcblk1p2 rw rootdelay=2 init=/init vram="10M" > > omapfb.vram="0:4M" > > PID hash table entries: 4096 (order: 2, 16384 bytes) > > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > > Memory: 456MB 256MB 256MB = 968MB total > > Memory: 965104k/965104k available, 26128k reserved, 262144K highmem > > Virtual kernel memory layout: > > vector : 0xffff0000 - 0xffff1000 ( 4 kB) > > fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) > > DMA : 0xffc00000 - 0xffe00000 ( 2 MB) > > vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB) > > lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) > > pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) > > modules : 0xbf000000 - 0xbfe00000 ( 14 MB) > > .init : 0xc0008000 - 0xc0044000 ( 240 kB) > > .text : 0xc0044000 - 0xc0620000 (6000 kB) > > .data : 0xc0620000 - 0xc06758e0 ( 343 kB) > > SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, > > Nodes=1 > > Hierarchical RCU implementation. > > RCU-based detection of stalled CPUs is disabled. > > Verbose stalled-CPUs detection is disabled. > > NR_IRQS:388 > > omap_hwmod: sys_32k_ck: missing clockdomain for sys_32k_ck. > > omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck. > > omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck. > > omap_hwmod: dmic: resetting > > omap_hwmod: dss_dsi1: cannot be enabled (3) > > omap_hwmod: dss_dsi2: cannot be enabled (3) > > omap_hwmod: dss_hdmi: cannot be enabled (3) > > omap_hwmod: dss_rfbi: cannot be enabled (3) > > omap_hwmod: dss_venc: cannot be enabled (3) > > omap_hwmod: ipu: failed to reset in 10000 usec > > omap_hwmod: mailbox: resetting > > omap_hwmod: omap-mcpdm-dai: cannot be enabled (3) > > omap_hwmod: mcspi1: resetting > > omap_hwmod: mcspi2: resetting > > omap_hwmod: mcspi3: resetting > > omap_hwmod: mcspi4: resetting > > omap_hwmod: mmc1: resetting > > omap_hwmod: mmc2: resetting > > omap_hwmod: mmc3: resetting > > omap_hwmod: mmc4: resetting > > omap_hwmod: mmc5: resetting > > omap_hwmod: timer3: resetting > > omap_hwmod: timer4: resetting > > omap_hwmod: timer5: resetting > > omap_hwmod: timer6: resetting > > omap_hwmod: timer7: resetting > > omap_hwmod: timer8: resetting > > omap_hwmod: timer9: resetting > > omap_hwmod: timer11: resetting > > GPMC revision 6.0 > > SmartReflex CLASS3 initialized > > OMAP clockevent source: GPTIMER1 at 32768 Hz > > Console: colour dummy device 80x30 > > Calibrating delay loop... 2013.49 BogoMIPS (lpj=7864320) > > pid_max: default: 32768 minimum: 301 > > Mount-cache hash table entries: 512 > > CPU: Testing write buffer coherency: ok > > Calibrating local timer... > > 50.00MHz. > > L310 cache controller enabled > > l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x1e470000 > > CPU1: Booted secondary processor > > Brought up 2 CPUs > > SMP: Total of 2 processors activated (4010.18 BogoMIPS). > > devtmpfs: initialized > > regulator: core version 0.5 > > NET: Registered protocol family 16 > > EMIF0 is enabled with IRQ142 > > EMIF1 is enabled with IRQ143 > > OMAP GPIO hardware version 0.1 > > omap_mux_init: Add partition: #1: core, flags: 2 > > omap_mux_init: Add partition: #2: wkup, flags: 2 > > Reprogramming LPDDR2 timingsto 400000000 Hz > > omap_disp_led_init: Configuring as one display LED > > _omap_mux_init_gpio: Could not set gpio4 > > Configured modem_ipc: n/a > > Modem HSI not detected > > res->start = 49022000 > > res->start = 49024000 > > res->start = 49026000 > > res->start = 48096000 > > OMAP DMA hardware revision 0.0 > > dma dma.0: System DMA registered > > HSI: device registered > > bio: create slab <bio-0> at 0 > > usbcore: registered new interface driver usbfs > > usbcore: registered new interface driver hub > > usbcore: registered new device driver usb > > i2c_omap i2c_omap.1: bus 1 rev4.0 at 400 kHz > > Skipping twl internal clock init and using bootloader value (unknown > > osc rate) > > twl6030: PIH (irq 39) chaining IRQs 368..387 > > twl6030_usb twl6030_usb: Initialized TWL6030 USB module > > regulator: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby > > regulator: VPP: 1800 <--> 2500 mV at 1900 mV normal standby > > regulator: VUSIM: 1200 <--> 2900 mV at 1800 mV normal standby > > regulator: VANA: 2100 mV normal standby > > regulator: VCXIO: 1800 mV normal standby > > regulator: VDAC: 1800 mV normal standby > > regulator: VUSB: 3300 mV normal standby > > regulator: VAUX1_6030: 1000 <--> 3000 mV at 2800 mV normal standby > > regulator: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby > > regulator: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby > > i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz > > i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz > > i2c_omap i2c_omap.4: bus 4 rev4.0 at 400 kHz > > Advanced Linux Sound Architecture Driver Version 1.0.23. > > Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. > > Bluetooth: Core ver 2.15 > > NET: Registered protocol family 31 > > Bluetooth: HCI device and connection manager initialized > > Bluetooth: HCI socket layer initialized > > Switching to clocksource timer-32k > > musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0 > > musb_hdrc musb_hdrc: USB OTG mode controller at fc0ab000 using DMA, > > IRQ 124 > > NET: Registered protocol family 2 > > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > > TCP bind hash table entries: 65536 (order: 7, 786432 bytes) > > TCP: Hash tables configured (established 131072 bind 65536) > > TCP reno registered > > UDP hash table entries: 512 (order: 2, 16384 bytes) > > UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) > > NET: Registered protocol family 1 > > RPC: Registered udp transport module. > > RPC: Registered tcp transport module. > > RPC: Registered tcp NFSv4.1 backchannel transport module. > > ipu-power ipu0: Test of writing to the device message log,done from > > ipu_pm_init > > ipu-power initialized ipu, major: 251, minor: 0 > > sdp4430_wifi_init: start > > omap-iommu omap-iommu.0: ducati registered > > omap-iommu omap-iommu.1: tesla registered > > iovmm-omap initialized ducati, major: 250, base-minor: 0 > > iovmm-omap initialized tesla, major: 250, base-minor: 1 > > omap-remoteproc omap-remoteproc.0: omap_rproc_probe: adding rproc > > tesla > > omap-remoteproc omap-remoteproc.0: omap-rproc initialized tesla, > > major: 249, bas > > e-minor: 0 > > omap-remoteproc omap-remoteproc.1: omap_rproc_probe: adding rproc > > ducati-proc0 > > omap-remoteproc omap-remoteproc.1: omap-rproc initialized ducati- > > proc0, major: 2 > > 49, base-minor: 1 > > omap-remoteproc omap-remoteproc.2: omap_rproc_probe: adding rproc > > ducati-proc1 > > omap-remoteproc omap-remoteproc.2: omap-rproc initialized ducati- > > proc1, major: 2 > > 49, base-minor: 2 > > highmem bounce pool size: 64 pages > > ashmem: initialized > > VFS: Disk quotas dquot_6.5.2 > > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > > msgmni has been set to 1372 > > SMC: Running on a GP device, SMC disabled > > alg: No test for stdrng (krng) > > io scheduler noop registered > > io scheduler deadline registered > > io scheduler cfq registered (default) > > OMAP DSS rev 4.0 > > OMAP DISPC rev 4.0 > > OMAP DSI rev 3.0 > > OMAP DSI2 rev 3.0 > > Enter hdmi_init() > > OMAP HDMI W1 rev 2.0 > > hdmi_panel_probe x_res= 1920 y_res = 1080 > > pico DLP probe called > > ... > > read more »
-- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
