change *ro* to *rw* in init.rc
--------------
Regards

Vikas KM


On Fri, May 27, 2011 at 8:06 PM, Rajesh RV <[email protected]>wrote:

> Hello Srinivas,
>    I modified my init.rc as explained. But still my display doesn't come
> up. The LED on the Board glows white.
>
> From my log message, i understand that everything is fine
>
> *
> VFS: Mounted root (ext3 filesystem) on device 179:18.
> *
> *
> devtmpfs: mounted
> Freeing init memory: 244K
> init: cannot open '/initlogo.rle'
> omapdss HDMI: powerchg (a=0,v=0,s=0/0)->(a=0,v=1,s=0) = (1:A)
> omapdss HDMI: Set L3 constraint to 200MHz
> omapdss HDMI: pwrchanged => (1,A) = 0
> omapdss HDMI: Disable HDMI_PHY_48MHz clock, hdmi_power = 1
>
> omapdss HDMI: Release L3 constraint
> init: cannot find '/system/etc/install-recovery.sh', disabling
> 'flash_recovery'
> init: cannot find '/system/bin/pvrsrvinit', disabling 'pvrsrvinit'
> # enabling adb
> adb_open
> st_drv: version magic '2.6.35.7 SMP preempt mod_unload ARMv7 ' should be
> '2.6.35.7-00137-gec89507-dirty SMP preempt mod_unload ARMv7 '
> warning: `zygote' uses 32-bit capabilities (legacy support in use)
> CPU1: shutdown
> request_suspend_state: wakeup (3->0) at 32275299097 (2000-01-01
> 20:27:12.555419978 UTC)
> CPU1: Booted secondary processor
> CPU1: shutdown
> request_suspend_state: sleep (0->3) at 98384613062 (2000-01-01
> 20:28:18.664733943 UTC)
> omapdss HDMI: powerchg (a=0,v=1,s=0/0)->(a=0,v=1,s=1) = (0:S)
> <dss_mgr_disable> disabling tv
> omapdss HDMI: pwrchanged => (0,S) = 0
> *
>
>
> I'm booting from SD card. My hardware is ES2.2 GP My boot arguments are as
> follows.Is my display set to some other port?
>
> *
> set bootargs 'androidboot.console=ttyO2 console=ttyO2,115200n8
> mem=456M@0x80000000 mem=512M@0xA0000000 root=/dev/mmcblk1p2 rw rootdelay=2
> init=/init vram="10M" omapfb.vram="0:4M"'
> setenv bootcmd 'mmcinit 0; fatload mmc 0 0x80000000 uImage; bootm
> 0x80000000'
> boot
> *
>
> What is it i'm missing here. Please help me.
>
> Thanks
> Rajesh RV
>
>
>
>
>
> --
> unsubscribe: [email protected]
> website: http://groups.google.com/group/android-porting
>

-- 
unsubscribe: [email protected]
website: http://groups.google.com/group/android-porting

Reply via email to