Hi Trevor, Lastly the following was the error which I got,
$sources/meta-beagleboard/contrib/boneflashtool/emmc-prepare.sh I did the angstrom build and i have the result as shown below gibson@debian:~$ cd deploy/glibc/images/beaglebone/ gibson@debian:~/deploy/glibc/images/beaglebone$ ls Angstrom-systemd-GNOME-image-glibc-ipk-v2015.06-beaglebone.rootfs.manifest Angstrom-systemd-GNOME-image-glibc-ipk-v2015.06-beaglebone.rootfs.tar.gz Angstrom-systemd-GNOME-image-glibc-ipk-v2015.06-beaglebone.rootfs.tar.xz MLO MLO-beaglebone MLO-beaglebone-2014.07 modules--4.1.4-r0.2-beaglebone-20151117052341.tgz modules-beaglebone.tgz README_-_DO_NOT_DELETE_FILES_IN_THIS_DIRECTORY.txt systemd-GNOME-image-beaglebone.manifest systemd-GNOME-image-beaglebone.tar.gz systemd-GNOME-image-beaglebone.tar.xz u-boot-beaglebone-2014.07-r0.img u-boot-beaglebone.img u-boot.img zImage zImage--4.1.4-r0.2-am335x-bone-20151117052341.dtb zImage--4.1.4-r0.2-am335x-boneblack-20151117052341.dtb zImage--4.1.4-r0.2-am335x-bonegreen-20151117052341.dtb zImage--4.1.4-r0.2-beaglebone-20151117052341.bin zImage-am335x-boneblack.dtb zImage-am335x-bone.dtb zImage-am335x-bonegreen.dtb zImage-beaglebone.bin When I made neccesary changes and in the emmc-prepare,sh and run as root like ./emmc-prepare.sh I get the following as the output, root@debian:/home/gibson/sources/meta-beagleboard/contrib/bone-flash-tool# ./emmc-prepare.sh Using 2015.11.17-DO-NOT-USE-FOR-PRODUCTION as identifier Trying to attach image file read error, sector 0 llseek error llseek error llseek error Loopdev: Incorrect partitioning, /dev/mapper/p1 not found Please advice Regards, Gibson On Tue, Dec 22, 2015 at 10:23 AM, Trevor Woerner <twoer...@gmail.com> wrote: > On 12/21/15 09:45, Gibson Justian wrote: > > gibson@debian:~/sources/meta-beagleboard/contrib/bone-flash-tool$ > > ./emmc-prepare.sh > > ls: cannot access > > > /deploy/glibc/images/beaglebone/Angstrom-systemd-GNOME-image-glibc-ipk-v2015.06-beaglebone.rootfs.tar.xz: > > No such file or directory > > Well... that looks like a pretty serious problem: the script can't find > your build artifact. > > > ./emmc-prepare.sh: 36: ./emmc-prepare.sh: kpartx: not found > > ...and here you're missing the "kpartx" application on your system. > You'll need to figure out how to install that on your host. > > _______________________________________________ > Angstrom-distro-devel mailing list > Angstrom-distro-devel@linuxtogo.org > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel > -- Regards, Gibson.J _______________________________________________ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
