I have recently installed Angstrom on my C3100 using the following:
Angstrom-x11-image-glibc-test-20070710-spitz.rootfs.tar.gz
zImage-2.6.21-spitz-20070710135226.bin
When the install was complete I tried to set up my bluetooth GPS.
The first proble that I found was that my USB bluetooth dongle had not been
automatically recognised. That was easy enough to fix with modprobe ohci-hcd.
The next problem I cannot figure out though:
The files "hciconfig" and "rfcomm" are not on the device.
I also checked in the hdimage1.tgz.
$ tar -tzf x11-image-spitz.tar.gz |grep hci
./usr/lib/ipkg/info/kernel-module-ohci-hcd.control
./usr/lib/ipkg/info/kernel-module-ohci-hcd.postinst
./usr/lib/ipkg/info/kernel-module-ohci-hcd.postrm
./usr/lib/ipkg/info/kernel-module-ohci-hcd.list
./usr/lib/ipkg/info/kernel-module-hci-vhci.control
./usr/lib/ipkg/info/kernel-module-hci-vhci.postinst
./usr/lib/ipkg/info/kernel-module-hci-vhci.postrm
./usr/lib/ipkg/info/kernel-module-hci-vhci.list
./usr/lib/ipkg/info/kernel-module-hci-uart.control
./usr/lib/ipkg/info/kernel-module-hci-uart.postinst
./usr/lib/ipkg/info/kernel-module-hci-uart.postrm
./usr/lib/ipkg/info/kernel-module-hci-uart.list
./usr/lib/ipkg/info/kernel-module-hci-usb.control
./usr/lib/ipkg/info/kernel-module-hci-usb.postinst
./usr/lib/ipkg/info/kernel-module-hci-usb.postrm
./usr/lib/ipkg/info/kernel-module-hci-usb.list
./etc/modutils/hci_uart.conf
./etc/bluetooth/hcid.conf
./etc/bluetooth/hciattach
./sbin/hcid
./sbin/hciattach
./lib/modules/2.6.21/kernel/drivers/usb/host/ohci-hcd.ko
./lib/modules/2.6.21/kernel/drivers/bluetooth/hci_vhci.ko
./lib/modules/2.6.21/kernel/drivers/bluetooth/hci_uart.ko
./lib/modules/2.6.21/kernel/drivers/bluetooth/hci_usb.ko
Similar results for rfcomm.
I have tried reinstalling the bluez-utils package, no change.
I also tried to check for this file in the ipk
(bluez-utils_3.12-r3_armv5te.ipk) but this does not seem to work
$ tar -tzf bluez-utils_3.12-r3_armv5te.ipk
gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error exit delayed from previous errors
So, I have a few questions:
1. Is there any reason that "ohci-hcd" is not mentioned in /etc/modutils?
2. Am I missing something basic in relation to hciconfig and rfcomm?
3. Is there something wrong with what I am trying to do to examine the contents
of the .ipk?
And a final question not related to any of the above:
4. What are all the .jffs2 files in the spitz download dir for? Are they to be
used by spitz at all?
Thanks for your help,
Eoghan
___________________________________________________________
Yahoo! Mail is the world's favourite email. Don't settle for less, sign up for
your free account today
http://uk.rd.yahoo.com/evt=44106/*http://uk.docs.yahoo.com/mail/winter07.html
_______________________________________________
Angstrom-distro-users mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
