You may be missing the point of Stefan's question. Is Ansible executing this git command as the SAME USER that you are executing the git command as, when you execute the command manually?
Authentication for git is user-based. If Ansible is not running the command as the SAME USER that you are using when you run the command manually, then you can expect authentication to fail. By the way, the user that Ansible is running git as is NOT necessarily the user that is running Ansible. A quick look at the Ansible docs reveals a git_config module. You could try using it to retrieve the global git configuration (the equivalent of running git config --global -l) via Ansible on the target host. Does the output match what you get when you execute that command manually on the target host? If not, you have found the problem. Regards, K. On Tue, Dec 10, 2019 at 8:17 PM Gyalgin Sherpa <[email protected]> wrote: > Hello Racke, > > Thank you for the quick response. My apologies for hijacking the loop, > this my first email will make a new Subject line going forward. > Coming back to my issue, yes I was successfully clone in my target machine > where ansible is installed . But when I target same location with following > line in ansible playbook, it’s prompting me password > > Best Regards > > On Tue, Dec 10, 2019 at 04:10 Stefan Hornburg (Racke) <[email protected]> > wrote: > >> On 12/10/19 10:05 AM, Gyalgin Sherpa wrote: >> > Hello team, >> > It’s asking me user and password while checking code from giit >> > git: >> > repo; ‘git url’ >> > dest : ‘local path’ >> > >> > But when I clone manually it does not prompt for password, >> > >> > Best Regards >> > >> >> Hello Gyalgin, >> >> it is really so hard to start a fresh email instead of hijacking the >> subject and providing more than next to nothing >> information about your problem? >> >> Did you try to clone the Git repo manually on the target system as the >> same user as Ansible? >> >> Regards >> Racke >> >> > On Tue, Dec 10, 2019 at 03:15 Stefan Hornburg (Racke) <[email protected] >> <mailto:[email protected]>> wrote: >> > >> > On 12/9/19 10:30 PM, Mark Bolden wrote: >> > > I am on Centos 7 and I was trying to install Pyrax and seeing >> these errors: >> > > >> > > ERROR: os-service-types 1.7.0 has requirement pbr!=2.1.0,>=2.0.0, >> but you'll have pbr 1.10.0 which is incompatible. >> > > ERROR: python-keystoneclient 3.22.0 has requirement >> pbr!=2.1.0,>=2.0.0, but you'll have pbr 1.10.0 which is >> > incompatible. >> > > ERROR: python-keystoneclient 3.22.0 has requirement >> requests>=2.14.2, but you'll have requests 2.6.0 which is >> > incompatible. >> > > ERROR: oslo-config 6.12.0 has requirement requests>=2.18.0, but >> you'll have requests 2.6.0 which is incompatible. >> > > ERROR: stevedore 1.31.0 has requirement pbr!=2.1.0,>=2.0.0, but >> you'll have pbr 1.10.0 which is incompatible. >> > > >> > > >> > > So, I Installed Python 3.6 and ran pip3 install pyrax and >> success! The problem seems to be that ansible-playbook is >> > > still looking at Python 2.7 which does NOT have the pyrax module >> installed because I am seeing this: >> > > >> > > TASK [Database build request] >> > > >> > >> >> **************************************************************************************************************************** >> > > fatal: [devdb -> localhost]: FAILED! => {"changed": false, "msg": >> "pyrax is required for this module"} >> > > >> > > How can I tell Ansible to NOT use Python 2.7 and only use 3.6 and >> its modules? >> > >> > Set the following variable to the path of your Python binary: >> > >> > ansible_python_interpreter: /usr/bin/python3 >> > >> > Regards >> > Racke >> > >> > > >> > > Anyone? Thanks in advance!! >> > > -M >> > > >> > > -- >> > > You received this message because you are subscribed to the >> Google Groups "Ansible Project" group. >> > > To unsubscribe from this group and stop receiving emails from it, >> send an email to >> > > [email protected] <mailto: >> ansible-project%[email protected]> >> > <mailto:[email protected] <mailto: >> ansible-project%[email protected]>>. >> > > To view this discussion on the web visit >> > > >> https://groups.google.com/d/msgid/ansible-project/6b5c8efe-0e1c-4728-9217-2894220268a4%40googlegroups.com >> > > >> > < >> https://groups.google.com/d/msgid/ansible-project/6b5c8efe-0e1c-4728-9217-2894220268a4%40googlegroups.com?utm_medium=email&utm_source=footer >> >. >> > >> > >> > -- >> > Ecommerce and Linux consulting + Perl and web application >> programming. >> > Debian and Sympa administration. Provisioning with Ansible. >> > >> > -- >> > You received this message because you are subscribed to the Google >> Groups "Ansible Project" group. >> > To unsubscribe from this group and stop receiving emails from it, >> send an email to >> > [email protected] <mailto: >> ansible-project%[email protected]>. >> > To view this discussion on the web visit >> > >> https://groups.google.com/d/msgid/ansible-project/49a16888-ce7d-7945-d253-ac62d1643bd9%40linuxia.de >> . >> > >> > -- >> > You received this message because you are subscribed to the Google >> Groups "Ansible Project" group. >> > To unsubscribe from this group and stop receiving emails from it, send >> an email to >> > [email protected] <mailto: >> [email protected]>. >> > To view this discussion on the web visit >> > >> https://groups.google.com/d/msgid/ansible-project/CABynDMHLje1D1AbBNk1zz5ZpGLU%3DCX268f3gLp%2Bb6706QHJ%3DSA%40mail.gmail.com >> > < >> https://groups.google.com/d/msgid/ansible-project/CABynDMHLje1D1AbBNk1zz5ZpGLU%3DCX268f3gLp%2Bb6706QHJ%3DSA%40mail.gmail.com?utm_medium=email&utm_source=footer >> >. >> >> >> -- >> Ecommerce and Linux consulting + Perl and web application programming. >> Debian and Sympa administration. Provisioning with Ansible. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Ansible Project" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ansible-project/479feb36-586f-6f35-3bae-eafd93859e99%40linuxia.de >> . >> > -- > You received this message because you are subscribed to the Google Groups > "Ansible Project" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ansible-project/CABynDMGDR3z-uNzYMJRnHVv4-6_UFupDk3wB7AE6O5c0oMQ%3DnA%40mail.gmail.com > <https://groups.google.com/d/msgid/ansible-project/CABynDMGDR3z-uNzYMJRnHVv4-6_UFupDk3wB7AE6O5c0oMQ%3DnA%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- *Karl Auer* { manager, systems support } P: 1300 759 975 E: [email protected] 2pisoftware.com GPG/PGP : 301B 1F4E 624D AD99 242C 7A68 EC24 7113 E854 4A4E Previous: 958A 2647 6C44 D376 3D63 86A5 FFB2 20BC 0257 5816 -- You received this message because you are subscribed to the Google Groups "Ansible Project" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/ansible-project/CA%2B%2BT08SCgcE0TTm3RKzmZVjMWQq-hTJwQekP_%3Dwv2HgPByKAww%40mail.gmail.com.
