Hello K, Yes same user while cloning and executing playbook Best
On Tue, Dec 10, 2019 at 04:47 Karl Auer <[email protected]> wrote: > You may be missing the point of Stefan's question. Is Ansible executing > this git command as the SAME USER that you are executing the git command > as, when you execute the command manually? > > Authentication for git is user-based. If Ansible is not running the > command as the SAME USER that you are using when you run the command > manually, then you can expect authentication to fail. By the way, the user > that Ansible is running git as is NOT necessarily the user that is running > Ansible. > > A quick look at the Ansible docs reveals a git_config module. You could > try using it to retrieve the global git configuration (the equivalent of > running git config --global -l) via Ansible on the target host. Does the > output match what you get when you execute that command manually on the > target host? If not, you have found the problem. > > Regards, K. > > On Tue, Dec 10, 2019 at 8:17 PM Gyalgin Sherpa <[email protected]> > wrote: > >> Hello Racke, >> >> Thank you for the quick response. My apologies for hijacking the loop, >> this my first email will make a new Subject line going forward. >> Coming back to my issue, yes I was successfully clone in my target >> machine where ansible is installed . But when I target same location with >> following line in ansible playbook, it’s prompting me password >> >> Best Regards >> >> On Tue, Dec 10, 2019 at 04:10 Stefan Hornburg (Racke) <[email protected]> >> wrote: >> >>> On 12/10/19 10:05 AM, Gyalgin Sherpa wrote: >>> > Hello team, >>> > It’s asking me user and password while checking code from giit >>> > git: >>> > repo; ‘git url’ >>> > dest : ‘local path’ >>> > >>> > But when I clone manually it does not prompt for password, >>> > >>> > Best Regards >>> > >>> >>> Hello Gyalgin, >>> >>> it is really so hard to start a fresh email instead of hijacking the >>> subject and providing more than next to nothing >>> information about your problem? >>> >>> Did you try to clone the Git repo manually on the target system as the >>> same user as Ansible? >>> >>> Regards >>> Racke >>> >>> > On Tue, Dec 10, 2019 at 03:15 Stefan Hornburg (Racke) < >>> [email protected] <mailto:[email protected]>> wrote: >>> > >>> > On 12/9/19 10:30 PM, Mark Bolden wrote: >>> > > I am on Centos 7 and I was trying to install Pyrax and seeing >>> these errors: >>> > > >>> > > ERROR: os-service-types 1.7.0 has requirement >>> pbr!=2.1.0,>=2.0.0, but you'll have pbr 1.10.0 which is incompatible. >>> > > ERROR: python-keystoneclient 3.22.0 has requirement >>> pbr!=2.1.0,>=2.0.0, but you'll have pbr 1.10.0 which is >>> > incompatible. >>> > > ERROR: python-keystoneclient 3.22.0 has requirement >>> requests>=2.14.2, but you'll have requests 2.6.0 which is >>> > incompatible. >>> > > ERROR: oslo-config 6.12.0 has requirement requests>=2.18.0, but >>> you'll have requests 2.6.0 which is incompatible. >>> > > ERROR: stevedore 1.31.0 has requirement pbr!=2.1.0,>=2.0.0, but >>> you'll have pbr 1.10.0 which is incompatible. >>> > > >>> > > >>> > > So, I Installed Python 3.6 and ran pip3 install pyrax and >>> success! The problem seems to be that ansible-playbook is >>> > > still looking at Python 2.7 which does NOT have the pyrax module >>> installed because I am seeing this: >>> > > >>> > > TASK [Database build request] >>> > > >>> > >>> >>> **************************************************************************************************************************** >>> > > fatal: [devdb -> localhost]: FAILED! => {"changed": false, >>> "msg": "pyrax is required for this module"} >>> > > >>> > > How can I tell Ansible to NOT use Python 2.7 and only use 3.6 >>> and its modules? >>> > >>> > Set the following variable to the path of your Python binary: >>> > >>> > ansible_python_interpreter: /usr/bin/python3 >>> > >>> > Regards >>> > Racke >>> > >>> > > >>> > > Anyone? Thanks in advance!! >>> > > -M >>> > > >>> > > -- >>> > > You received this message because you are subscribed to the >>> Google Groups "Ansible Project" group. >>> > > To unsubscribe from this group and stop receiving emails from >>> it, send an email to >>> > > [email protected] <mailto: >>> ansible-project%[email protected]> >>> > <mailto:[email protected] <mailto: >>> ansible-project%[email protected]>>. >>> > > To view this discussion on the web visit >>> > > >>> https://groups.google.com/d/msgid/ansible-project/6b5c8efe-0e1c-4728-9217-2894220268a4%40googlegroups.com >>> > > >>> > < >>> https://groups.google.com/d/msgid/ansible-project/6b5c8efe-0e1c-4728-9217-2894220268a4%40googlegroups.com?utm_medium=email&utm_source=footer >>> >. >>> > >>> > >>> > -- >>> > Ecommerce and Linux consulting + Perl and web application >>> programming. >>> > Debian and Sympa administration. Provisioning with Ansible. >>> > >>> > -- >>> > You received this message because you are subscribed to the Google >>> Groups "Ansible Project" group. >>> > To unsubscribe from this group and stop receiving emails from it, >>> send an email to >>> > [email protected] <mailto: >>> ansible-project%[email protected]>. >>> > To view this discussion on the web visit >>> > >>> https://groups.google.com/d/msgid/ansible-project/49a16888-ce7d-7945-d253-ac62d1643bd9%40linuxia.de >>> . >>> > >>> > -- >>> > You received this message because you are subscribed to the Google >>> Groups "Ansible Project" group. >>> > To unsubscribe from this group and stop receiving emails from it, send >>> an email to >>> > [email protected] <mailto: >>> [email protected]>. >>> > To view this discussion on the web visit >>> > >>> https://groups.google.com/d/msgid/ansible-project/CABynDMHLje1D1AbBNk1zz5ZpGLU%3DCX268f3gLp%2Bb6706QHJ%3DSA%40mail.gmail.com >>> > < >>> https://groups.google.com/d/msgid/ansible-project/CABynDMHLje1D1AbBNk1zz5ZpGLU%3DCX268f3gLp%2Bb6706QHJ%3DSA%40mail.gmail.com?utm_medium=email&utm_source=footer >>> >. >>> >>> >>> -- >>> Ecommerce and Linux consulting + Perl and web application programming. >>> Debian and Sympa administration. Provisioning with Ansible. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Ansible Project" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ansible-project/479feb36-586f-6f35-3bae-eafd93859e99%40linuxia.de >>> . >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "Ansible Project" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/ansible-project/CABynDMGDR3z-uNzYMJRnHVv4-6_UFupDk3wB7AE6O5c0oMQ%3DnA%40mail.gmail.com >> <https://groups.google.com/d/msgid/ansible-project/CABynDMGDR3z-uNzYMJRnHVv4-6_UFupDk3wB7AE6O5c0oMQ%3DnA%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> > > > -- > > *Karl Auer* { manager, systems support } > P: 1300 759 975 > E: [email protected] > 2pisoftware.com > > GPG/PGP : 301B 1F4E 624D AD99 242C 7A68 EC24 7113 E854 4A4E > Previous: 958A 2647 6C44 D376 3D63 86A5 FFB2 20BC 0257 5816 > > -- > You received this message because you are subscribed to the Google Groups > "Ansible Project" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ansible-project/CA%2B%2BT08SCgcE0TTm3RKzmZVjMWQq-hTJwQekP_%3Dwv2HgPByKAww%40mail.gmail.com > <https://groups.google.com/d/msgid/ansible-project/CA%2B%2BT08SCgcE0TTm3RKzmZVjMWQq-hTJwQekP_%3Dwv2HgPByKAww%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Ansible Project" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/ansible-project/CABynDMFsB0aFQvLOzW06h__1SUxHQhwgmxusdszXWYPHBXMT_g%40mail.gmail.com.
