Hi Pushparaj,
Thanks for above config. But i feel above command may partially only solve
my issue feel. I feel i didn't frame the question properly to get the
correct response.
I need to write a script to verify that boot statement is automatically set
in ALL member switches of a stacked switch when doing post-copying
verification.
But the problem is the script i know checks if boot statement for new image
is set or not. It DOESN'T check if the boot statement is set for ALL member
switches or not.
In other words, in below output, in case if new image is missing for 1 of
the 3 member switches, how can i identify it using a script? Each switch
may contain different number of stacked switch, so i may not be able to use
pipe length parameter unles i included some conditional (which may make the
script very lengthy)
SWITCH#sh boot | i BOOT path-list
BOOT path-list :
flash:/c2960x-universalk9-mz.152-4.E7/c2960x-universalk9-mz.154-4.E4.bin
BOOT path-list :
flash:/c2960x-universalk9-mz.152-4.E7/c2960x-universalk9-mz.154-4.E4.bin
BOOT path-list :
flash:/c2960x-universalk9-mz.152-4.E7/c2960x-universalk9-mz.154-4.E4.bin
On Thursday, 4 March, 2021 at 11:18:41 am UTC+5:30 rajthecomputerguy wrote:
> you can use regex to match and pipe length -- that should be equal to 3
>
> regex_findall("flash:/c2960x-universalk9-mz.152-4.E7/c2960x-universalk9-mz.154-4.E4.bin")
>
> | length
>
>
>
> On Thu, Mar 4, 2021 at 3:24 AM Vikram S <[email protected]> wrote:
>
>> When i use below command, it automatically copies image to ALL member
>> switches and sets boot statement by itself.
>>
>> archive download-sw /leave-old-sw ftp://username:[email protected]
>> /c2960x-universalk9-tar.154-4.E4.tar
>>
>>
>> I need to write a script to verify that boot statement is automatically
>> set in ALL member switches of a stacked switch after this copying. But
>> problem is i can easily write it when the boot statement is only 1 line.
>> But when it is in multiple lines as below (3 boot statement for 3 member
>> switches), thenhow can i verify
>> that'flash:/c2960x-universalk9-mz.152-4.E7/c2960x-universalk9-mz.154-4.E4.bin'
>>
>> exists on every line and not just in 1 or 2 lines?
>>
>>
>> SWITCH#sh boot | i BOOT path-list
>>
>> BOOT path-list :
>> flash:/c2960x-universalk9-mz.152-4.E7/c2960x-universalk9-mz.154-4.E4.bin
>>
>> BOOT path-list :
>> flash:/c2960x-universalk9-mz.152-4.E7/c2960x-universalk9-mz.154-4.E4.bin
>>
>> BOOT path-list :
>> flash:/c2960x-universalk9-mz.152-4.E7/c2960x-universalk9-mz.154-4.E4.bin
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Ansible Project" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/ansible-project/a473afb7-a028-4dcb-b22e-3149242db38bn%40googlegroups.com
>>
>> <https://groups.google.com/d/msgid/ansible-project/a473afb7-a028-4dcb-b22e-3149242db38bn%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>
>
> --
>
> Thanks,
>
> Pushparaj G
>
>
--
You received this message because you are subscribed to the Google Groups
"Ansible Project" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/ansible-project/baaeb194-7326-4ed7-ae81-c790ac7b321bn%40googlegroups.com.
