You can use length of stacked serial number in facts so that you can know how many switch the stack has and you can compare length of boot path regex
ansible_net_stacked_models list / elements=string when multiple devices are configured in a stack The model names of each device in the stack ansible_net_stacked_serialnums list / elements=string when multiple devices are configured in a stack The serial numbers of each device in the stack On Fri, Mar 5, 2021, 8:09 PM Vikram S <[email protected]> wrote: > Hi Pushparaj, > > Thanks for above config. But i feel above command may partially only solve > my issue feel. I feel i didn't frame the question properly to get the > correct response. > > I need to write a script to verify that boot statement is automatically > set in ALL member switches of a stacked switch when doing post-copying > verification. > > But the problem is the script i know checks if boot statement for new > image is set or not. It DOESN'T check if the boot statement is set for ALL > member switches or not. > > In other words, in below output, in case if new image is missing for 1 of > the 3 member switches, how can i identify it using a script? Each switch > may contain different number of stacked switch, so i may not be able to use > pipe length parameter unles i included some conditional (which may make the > script very lengthy) > > SWITCH#sh boot | i BOOT path-list > > BOOT path-list : > flash:/c2960x-universalk9-mz.152-4.E7/c2960x-universalk9-mz.154-4.E4.bin > > BOOT path-list : > flash:/c2960x-universalk9-mz.152-4.E7/c2960x-universalk9-mz.154-4.E4.bin > > BOOT path-list : > flash:/c2960x-universalk9-mz.152-4.E7/c2960x-universalk9-mz.154-4.E4.bin > > On Thursday, 4 March, 2021 at 11:18:41 am UTC+5:30 rajthecomputerguy wrote: > >> you can use regex to match and pipe length -- that should be equal to 3 >> >> regex_findall("flash:/c2960x-universalk9-mz.152-4.E7/c2960x-universalk9-mz.154-4.E4.bin") >> | length >> >> >> >> On Thu, Mar 4, 2021 at 3:24 AM Vikram S <[email protected]> wrote: >> >>> When i use below command, it automatically copies image to ALL member >>> switches and sets boot statement by itself. >>> >>> archive download-sw /leave-old-sw ftp://username:[email protected] >>> /c2960x-universalk9-tar.154-4.E4.tar >>> >>> >>> I need to write a script to verify that boot statement is automatically >>> set in ALL member switches of a stacked switch after this copying. But >>> problem is i can easily write it when the boot statement is only 1 line. >>> But when it is in multiple lines as below (3 boot statement for 3 member >>> switches), thenhow can i verify >>> that'flash:/c2960x-universalk9-mz.152-4.E7/c2960x-universalk9-mz.154-4.E4.bin' >>> exists on every line and not just in 1 or 2 lines? >>> >>> >>> SWITCH#sh boot | i BOOT path-list >>> >>> BOOT path-list : >>> flash:/c2960x-universalk9-mz.152-4.E7/c2960x-universalk9-mz.154-4.E4.bin >>> >>> BOOT path-list : >>> flash:/c2960x-universalk9-mz.152-4.E7/c2960x-universalk9-mz.154-4.E4.bin >>> >>> BOOT path-list : >>> flash:/c2960x-universalk9-mz.152-4.E7/c2960x-universalk9-mz.154-4.E4.bin >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Ansible Project" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ansible-project/a473afb7-a028-4dcb-b22e-3149242db38bn%40googlegroups.com >>> <https://groups.google.com/d/msgid/ansible-project/a473afb7-a028-4dcb-b22e-3149242db38bn%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> >> >> -- >> >> Thanks, >> >> Pushparaj G >> >> -- > You received this message because you are subscribed to the Google Groups > "Ansible Project" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ansible-project/baaeb194-7326-4ed7-ae81-c790ac7b321bn%40googlegroups.com > <https://groups.google.com/d/msgid/ansible-project/baaeb194-7326-4ed7-ae81-c790ac7b321bn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Ansible Project" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/ansible-project/CAE5Yv1Qfuxx5Jc7%2BmuqGMUL9M4LAs-s1xaR5zCvv5jvSKi7Qyw%40mail.gmail.com.
