Dear all,
I've installed aoserver 3.4.2 on my freebsd 4.9 laptop
for developing and testing some web applications I'm
planning to create. The installation went ok and I can
serve static pages. However, when I try to feed my
system some .tcl pages under pageroot I get the whole
page as text and not the results of the tcl statements
I wrote.
For instance, this little hello world tcl program
doesn't appear as expected in the browser.
<hello.tcl>
ns_return 200 text/html "<html>
<head>
<title>Testing</title>
</head>
<body>
<p>Hello, world</p>
</body>
</html>
The output of this when I put the commands in a .tcl
file under pageroot is:
ns_return 200 text/html "<html>
<head>
<title>Testing</title>
</head>
<body>
<p>Hello, world</p>
</body>
</html>"
I then tried something similar but the results were
the same:
ns_write "HTTP/1.0 200 OK
MIME-Version: 1.0
Content-Type: text/html"
ns_write "<html>
<head>
<title>Testing</title>
</head>
<body>
<p>Hello, world</p>
</body>
</html>"
I also have a question regarding database access with
the postgres driver. I have installed postgres 7.3.4
and it works fine. However, I wasn't able to find no
postgres.so file in any directory on my system. I
thought aolserver would install it somewhere and I
could use that location to find it. What I did find
was a /usr/local/lib/postgresql/plpgsql.so file, and I
added it to db section, but I don't think this will do
the trick:-)
Here is my nsd configuration file:
# $Header:
/cvsroot/aolserver/aolserver/nsd/sample-config.tcl,v
1.2 2000/12/13 21:50:27 kriston Exp $
ns_log notice "config.tcl: starting to read config
file..."
#
# Set some Tcl variables that are commonly used
throughout this file.
#
set httpport 8000
set httpsport 8443
# The hostname and address should be set to actual
values.
set hostname localhost
set address 127.0.0.1
set servername "server1"
set serverdesc "Server Name"
set homedir /home/rgilaard/
set bindir /usr/local/aolserver/bin/
set pageroot
${homedir}/servers/${servername}/pages/
set directoryfile
index.adp,index.html,index.htm
set ext [info sharedlibextension]
# nsssl: Only loads if keyfile.pem and certfile.pem
exist.
#set sslmodule nsssl${ext} ;# Domestic
128-bit/1024-bit SSL.
set sslmodule nsssle${ext} ;# Exportable
40-bit/512-bit SSL.
set sslkeyfile
${homedir}/servers/${servername}/modules/nsssl/keyfile.pem
set sslcertfile
${homedir}/servers/${servername}/modules/nsssl/certfile.pem
# nscp: Uncomment the sample password and log in with
"nsadmin", password "x",
# type "ns_crypt newpassword salt" and put the
encrypted string below.
set nscp_port 9999
set nscp_addr 127.0.0.1
set nscp_user ""
#set nscp_user "nsadmin:t2GqvvaiIUbF2:" ;# sample
user="nsadmin", pw="x".
#
# Global server parameters
#
ns_section "ns/parameters"
ns_param home $homedir
ns_param debug false
#
# Thread library (nsthread) parameters
#
ns_section "ns/threads"
ns_param mutexmeter true ;# measure lock
contention
#ns_param stacksize [expr 128*1024] ;# Per-thread
stack size.
#
# MIME types.
#
# Note: AOLserver already has an exhaustive list of
MIME types, but in
# case something is missing you can add it here.
#
ns_section "ns/mimetypes"
ns_param default "*/*" ;# MIME type for
unknown extension.
ns_param noextension "*/*" ;# MIME type for
missing extension.
#ns_param ".xls" "application/vnd.ms-excel"
############################################################
#
# Server-level configuration
#
# There is only one server in AOLserver, but this is
helpful when multiple
# servers share the same configuration file. This
file assumes that only
# one server is in use so it is set at the top in the
"server" Tcl variable.
# Other host-specific values are set up above as Tcl
variables, too.
#
ns_section "ns/servers"
ns_param $servername $serverdesc
#
# Server parameters
#
ns_section "ns/server/${servername}"
ns_param directoryfile $directoryfile
ns_param pageroot $pageroot
ns_param globalstats true ;# Enable
built-in statistics.
ns_param urlstats true ;# Enable URL
statistics.
ns_param maxurlstats 1000 ;# Max number of
URL's to do stats on.
ns_param enabletclpages true ;# Parse *.tcl
files in pageroot.
#
# Scaling and Tuning Options
#
# Note: These values aren't necessarily the defaults.
#
#ns_param connsperthread 0 ;# Normally
there's one conn per thread
#ns_param flushcontent false ;# Flush all
data before returning
#ns_param maxconnections 100 ;# Max
connections to put on queue
#ns_param maxdropped 0 ;# Shut down if
dropping too many conns
#ns_param maxthreads 20 ;# Tune this to
scale your server
#ns_param minthreads 0 ;# Tune this to
scale your server
#ns_param threadtimeout 120 ;# Idle threads
die at this rate
# Directory listings -- use an ADP or a Tcl proc to
generate them.
#ns_param directoryadp $pageroot/dirlist.adp ;#
Choose one or the other.
#ns_param directoryproc _ns_dirlist ;#
...but not both!
#ns_param directorylisting simple ;#
Can be simple or fancy.
#
# ADP (AOLserver Dynamic Page) configuration
#
ns_section "ns/server/${servername}/adp"
ns_param map "/*.adp" ;# Extensions to
parse as ADP's.
#ns_param map "/*.html" ;# Any extension
can be mapped.
ns_param enableexpire false ;# Set "Expires:
now" on all ADP's.
ns_param enabledebug false ;# Allow Tclpro
debugging with "?debug".
# ADP special pages
#ns_param errorpage ${pageroot}/errorpage.adp
;# ADP error page.
#
# ADP custom parsers -- see adp.c
#
ns_section "ns/server/${servername}/adp/parsers"
ns_param adp ".adp" ;# adp is the
default parser.
#
# Socket driver module (HTTP) -- nssock
#
ns_section "ns/server/${servername}/module/nssock"
ns_param port $httpport
ns_param hostname $hostname
ns_param address $address
#
# Socket driver module (HTTPS) -- nsssl
#
# nsssl does not load unless sslkeyfile/sslcertfile
exist (above).
#
ns_section "ns/server/${servername}/module/nsssl"
ns_param port $httpsport
ns_param hostname $hostname
ns_param address $address
ns_param keyfile $sslkeyfile
ns_param certfile $sslcertfile
#
# Control port -- nscp
#
# nscp does not load unless nscp_user is a valid
user.
#
ns_section "ns/server/${servername}/module/nscp"
ns_param port $nscp_port
ns_param address $nscp_addr
ns_section "ns/server/${servername}/module/nscp/users"
ns_param user $nscp_user
#
# Access log -- nslog
#
ns_section "ns/server/${servername}/module/nslog"
ns_param rolllog true ;# Should we roll
log?
ns_param rollonsignal true ;# Roll log on
SIGHUP.
ns_param rollhour 0 ;# Time to roll
log.
ns_param maxbackup 5 ;# Max number to
keep around when rolling.
#
# CGI interface -- nscgi
#
# WARNING: These directories must not live under
pageroot.
#
ns_section "ns/server/${servername}/module/nscgi"
#ns_param map "GET /cgi /usr/local/cgi" ;# CGI
script file dir (GET).
#ns_param map "POST /cgi /usr/local/cgi" ;# CGI
script file dir (POST).
ns_section "ns/db/drivers"
ns_param postgres
/usr/local/lib/postgresql/plpgsql.so ;#Volgens doc
niet de juiste
ns_section "ns/db/pools"
ns_param main "Intranet Pool"
ns_section "ns/db/pool/main"
ns_param Driver postgres
ns_param Connections 20
ns_param DataSource localhost:5432:vogels
ns_param User rgilaard
ns_param Verbose Off
ns_param LogSQLErrors On
ns_param ExtendedTableInfo On
ns_param MaxOpen 1000000000
ns_param MaxIdle 1000000000
ns_section "ns/server/${servername}/db"
ns_param Pools "*"
ns_param DefaultPool "main"
#
# Modules to load
#
ns_section "ns/server/${servername}/modules"
ns_param nssock ${bindir}/nssock${ext}
ns_param nslog ${bindir}/nslog${ext}
#ns_param nscgi ${bindir}/nscgi${ext} ;#
Map the paths before using.
#ns_param nsperm ${bindir}/nsperm${ext} ;#
Edit passwd before using.
#
# nsssl: Only loads if sslcertfile and sslkeyfile
exist (see above).
#
if { [file exists $sslcertfile] && [file exists
$sslkeyfile] } {
ns_param nsssl ${bindir}/${sslmodule}
} else {
ns_log warning "config.tcl: nsssl not loaded --
key/cert files do not exist."
}
#
# nscp: Only loads if nscp_user is set (see above).
#
if { $nscp_user != "" } {
if ![string match "127.0.0.1" $nscp_addr] {
# Anything but 127.0.0.1 is not recommended.
ns_log warning "config.tcl: nscp listening on
${nscp_addr}:${nscp_port}"
}
ns_param nscp ${bindir}/nscp${ext}
} else {
ns_log warning "config.tcl: nscp not loaded --
user/password is not set."
}
ns_log notice "config.tcl: finished reading config
file."
Can anyone be of assistence? I'm new to this aolserver
thing but I really want to get going and develop some
applications with it.
Brgds
Dino Vliet
__________________________________
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
http://hotjobs.sweepstakes.yahoo.com/signingbonus
--
AOLserver - http://www.aolserver.com/
To Remove yourself from this list, simply send an email to <[EMAIL PROTECTED]> with the
body of "SIGNOFF AOLSERVER" in the email message. You can leave the Subject: field of
your email blank.
