Hi all, I have problems with compiling 4.0.10 version. Also tried 4.0.9, with the same effects. The same problems on MadrakeLinux 10.1 and Tru64Unix 5.1A.
gcc -pipe -O2 -Wall -Wno-implicit-int -fno-strict-aliasing -I../include -I/usr/local/include -DNO_CONST -DTCL_THREADS=1 -DUSE_THREAD_ALLOC=1 -D_REENTRANT=1 -D_THREAD_SAFE=1 -DHAVE_PTHREAD_ATTR_SETSTACKSIZE=1 -DHAVE_PTHREAD_ATFORK=1 -DHAVE_READDIR_R=1 -DHAVE_THREE_ARG_READDIR_R=1 -DPEEK_XCLOSEIM=1 -D_LARGEFILE64_SOURCE=1 -DTCL_WIDE_INT_TYPE=long\ long -DHAVE_STRUCT_STAT64=1 -DHAVE_OPEN64=1 -DHAVE_LSEEK64=1 -DHAVE_TYPE_OFF64_T=1 -DHAVE_GETCWD=1 -DHAVE_OPENDIR=1 -DHAVE_STRSTR=1 -DHAVE_STRTOL=1 -DHAVE_STRTOLL=1 -DHAVE_STRTOULL=1 -DHAVE_TMPNAM=1 -DHAVE_WAITPID=1 -DHAVE_LIMITS_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DUSE_TERMIOS=1 -DHAVE_SYS_TIME_H=1 -DTIME_WITH_SYS_TIME=1 -DHAVE_TM_ZONE=1 -DHAVE_GMTIME_R=1 -DHAVE_LOCALTIME_R=1 -DHAVE_TM_GMTOFF=1 -DHAVE_TIMEZONE_VAR=1 -DHAVE_ST_BLKSIZE=1 -DSTDC_HEADERS=1 -DHAVE_SIGNED_CHAR=1 -DHAVE_LANGINFO=1 -DHAVE_SYS_IOCTL_H=1 -DTCL_CFG_OPTIMIZED=1 -DTCL_CFG_DEBUG=1 -DHAVE_INTTYPES_H=1 -DHAVE_TIMEGM=1 -DHAVE_POLL=1 -DHAVE_DRAND48=1 -DHAVE_RANDOM=1 -DHAVE_CMMSG=1 -DHAVE_GETADDRINFO=1 -DHAVE_GETNAMEINFO=1 -DHAVE_ZLIB_H=1 -DHAVE_LIBZ=1 -DNsthreadsInit=_init -c -o pthread.o pthread.c /bin/rm -f libnsthread L../nsthread -L../nsd -o libnsthread error.o master.o memory.o mutex.o cslock.o rwlock.o reentrant.o sema.o thread.o tls.o signal.o compat.o time.o fork.o pthread.o -L/scratch/install/tcl8.4.9/unix -ltcl8.4 -lpthread -lieee -lm -lz -lgcc_s make[1]: L../nsthread: Command not found make[1]: [libnsthread] Error 127 (ignored) gcc -pipe -O2 -Wall -Wno-implicit-int -fno-strict-aliasing -I../include -I/usr/local/include -DNO_CONST -DTCL_THREADS=1 -DUSE_THREAD_ALLOC=1 -D_REENTRANT=1 -D_THREAD_SAFE=1 -DHAVE_PTHREAD_ATTR_SETSTACKSIZE=1 -DHAVE_PTHREAD_ATFORK=1 -DHAVE_READDIR_R=1 -DHAVE_THREE_ARG_READDIR_R=1 -DPEEK_XCLOSEIM=1 -D_LARGEFILE64_SOURCE=1 -DTCL_WIDE_INT_TYPE=long\ long -DHAVE_STRUCT_STAT64=1 -DHAVE_OPEN64=1 -DHAVE_LSEEK64=1 -DHAVE_TYPE_OFF64_T=1 -DHAVE_GETCWD=1 -DHAVE_OPENDIR=1 -DHAVE_STRSTR=1 -DHAVE_STRTOL=1 -DHAVE_STRTOLL=1 -DHAVE_STRTOULL=1 -DHAVE_TMPNAM=1 -DHAVE_WAITPID=1 -DHAVE_LIMITS_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DUSE_TERMIOS=1 -DHAVE_SYS_TIME_H=1 -DTIME_WITH_SYS_TIME=1 -DHAVE_TM_ZONE=1 -DHAVE_GMTIME_R=1 -DHAVE_LOCALTIME_R=1 -DHAVE_TM_GMTOFF=1 -DHAVE_TIMEZONE_VAR=1 -DHAVE_ST_BLKSIZE=1 -DSTDC_HEADERS=1 -DHAVE_SIGNED_CHAR=1 -DHAVE_LANGINFO=1 -DHAVE_SYS_IOCTL_H=1 -DTCL_CFG_OPTIMIZED=1 -DTCL_CFG_DEBUG=1 -DHAVE_INTTYPES_H=1 -DHAVE_TIMEGM=1 -DHAVE_POLL=1 -DHAVE_DRAND48=1 -DHAVE_RANDOM=1 -DHAVE_CMMSG=1 -DHAVE_GETADDRINFO=1 -DHAVE_GETNAMEINFO=1 -DHAVE_ZLIB_H=1 -DHAVE_LIBZ=1 -DNsthreadsInit=_init -c -o nsthreadtest.o nsthreadtest.c nsthreadtest.c: In function `DumperThread': nsthreadtest.c:336: warning: implicit declaration of function `Tcl_GetMemoryInfo' nsthreadtest.c: At top level: nsthreadtest.c:51: warning: 'RCSID' defined but not used /bin/rm -f nsthreadtest gcc -pipe -L../nsthread -L../nsd -o nsthreadtest nsthreadtest.o libnsthread -L/scratch/install/tcl8.4.9/unix -ltcl8.4 -lpthread -lieee -lm -lz -lgcc_s gcc: libnsthread: No such file or directory make[1]: *** [nsthreadtest] Error 1 make[1]: Leaving directory `/scratch/install/aolserver-4.0.9/nsthread' make: *** [all] Error 1 It seems there is some problem with makefiles (bad macro substitution ?) while linking into shared libraries. What is the trick to get it compiled ? Thanks a lot, David -- AOLserver - http://www.aolserver.com/ To Remove yourself from this list, simply send an email to <[EMAIL PROTECTED]> with the body of "SIGNOFF AOLSERVER" in the email message. You can leave the Subject: field of your email blank.
