----- Original Message ----- From: "Deon Rodden" <[EMAIL PROTECTED]> Newsgroups: linux.sw.apache.fp.support To: <[EMAIL PROTECTED]> Sent: Saturday, August 16, 2003 3:38 AM Subject: Re: [Apache-FP] Segmentation Error
> Greetings, > > I think I'm having the same problem. owsadm.exe crashes on Redhat 9.0 when > trying to bind the administration to any port higher than 1023. If I try the > command w/ a port lowert than 1023 I get a "The port must be a number > between 1023 and 32767." but as soon as I try and make the port higher than > 1023 it says Segmentation fault. I haven't had to run owsadm.exe because I've upgraded systems to RH9. I don't know that I've done a fresh install with RH 9. I thought I did. You might want to grab the latest tar.gz from www.rtr.com for the FPSE2002 stuff. Then just pull the owsadm.exe from that and copy it over the one from my RPM. The newer stuff from RTR probably is compiled so it will work on RH 7 / 8 / 9 just fine. If you try that and it works let me know because I will swap out the owsadm.exe in my RPM for the newer one if it does, and if the newer one works on my test RH 7 and 8 boxes. -Josh _______________________________________________ Apache-FP mailing list [EMAIL PROTECTED] http://lists.joshie.com/mailman/listinfo/apache-fp Donations: http://www.amazon.com/paypage/PT5LZITM9L227
