Ok, I think I have found what is wrong. The wildcard on the cname is not working. I think it is turned off in bind by default at my domain host....
Is there any way to set APE up NOT using wildcards? For instance, could i create 0.ape.mydomain.com, 1.ape.mydomain.com and get it up and running? I just have access to a web form to configure my domain, I do not have direct access to the zone-file or to bind itself. Ideas are more than welcome :/ On Sep 10, 1:45 am, Bjarman <[email protected]> wrote: > Ok, my installation is still not working. Here is my entire setup, > perhaps you can see what is wrong: > > ape.conf looks like this: > > uid { > # "aped" switch to this user/group if it run as root > user = www-data > group = www-data > > } > > Server { > port = 6969 > daemon = no > ip_listen = xx.xx.xx.xx (my external ip) > ip_local = xx.xx.xx.xx (my external ip again) > domain = mydomain.com > rlimit_nofile = 65536 > > } > > My config.js looks like this: > > APE.Config.baseUrl = 'http://mydomain.com/Source';//APE JSF > APE.Config.domain = 'mydomain.com'; //Your domain, must be the same > than the domain in aped.conf of your server > APE.Config.server = 'ape.mydomain.com'; //APE server URL > > My zonefile reads: > > @ A xx.xx.xx.xx > www A xx.xx.xx.xx > ape A xx.xx.xx.xx > *.ape CNAME ape > > My virtual host for sub domain "ape" looks like this: > > DocumentRoot "/srv/www/ape/htdocs" > Servername ape.mydomain.com > ServerAlias ape.mydomain.com > ServerAlias *.ape.mydomain.com > ProxyRequests Off > <Proxy *> > Order Deny,Allow > Allow from all > </Proxy> > > Problem:http://0.ape.mydomain.com/?script&it_works&anticachereturns > a "server not foud". Im guessing that the wildcard is not working. > > What am I doing wrong? > > On Sep 10, 1:32 am, John <[email protected]> wrote: > > > Exactly. But if you like to use a subdomain for your website you can > > do : > > > 1. Create a subdomain mydemo.mydomain.com > > 2. Upload JSF to mydemo.mydomain.com > > 3. Create a subdomain for the APE Server : ape.mydemo.mydomain.com > > 4. Put the correct URLs in the confs files (both JSF and Server) > > 5. Do the wildcard > > > This should work ;) > > > On Sep 10, 1:29 am, Bjarman <[email protected]> wrote: > > > > Hello, thanks for a swift reply (and sorry for the double post) > > > > Ok, if i understad correctly this is what i should do: > > > > 1. Upload JSF to mydomain.com > > > 2. Create a sub domain for ape, for instance ape.mydomain.com > > > 3. Make sure that the wildcard on the sub domain is working properly > > > > The first to seems to be straight forward but i suspect that i might > > > have a problem with the wildcard.... > > > > I will try this and hopefully it will work. > > > > On Sep 10, 1:20 am, John Chavarria <[email protected]> wrote: > > > > > Hello Bjarman, > > > > > (I also checked the email you've sent us to the ape-project contact > > > > email, even if you should use only mailing list for help :)) > > > > > Your problem is that you don't have set up a subdomain for the APE > > > > server itself. > > > > > I mean you're accessing to your demo through ape.yourdomain.com <= > > > > This is the URL of your website, but the APE server needs its own > > > > subdomain such as ape.ape.yourdomain.com > > > > > In your config.js it will looks like : > > > > APE.Config.baseUrl = 'http://ape.yourdomain.com/Source';//APEJSF > > > > APE.Config.domain = 'ape.yourdomain.com'; //Your domain, must be the > > > > same than the domain in aped.conf of your server > > > > APE.Config.server = 'ape.ape.yourdomain.com'; //APE server URL > > > > Don't forget you also need a wildcard for the APE server frequencies > > > > (0.ape.ape.yourdomain.com, 1.ape.ape.yourdomain.com ...) > > > > Hope I was able to help. > > > > > Regards, > > > > > John Chavarria > > > > Weelya - CEO / Graphic Designer > > > > >www.ape-project.orgwww.weelya.com > > > > > Le 10 sept. 2009 à 00:51, Bjarman a écrit : > > > > > > Hello all! > > > > > > I am a ape-noob with some problems. I have made the installation as > > > > > described herehttp://www.ape-project.org/wiki/index.php/Setupusing > > > > > apache. I have created the subdomains and also created the v-host. The > > > > > aped is up and running listening on 127.0.0.1:6969 according to > > > > > netstat. > > > > > > However, none of the demos are working, in fact all pages comes out > > > > > blank in my browser, no js-errors or anything, just plain blank? > > > > > > I understand if it is difficult to point me in the right direction but > > > > > any help is welcome. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "APE Project" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/ape-project?hl=en --- APE Project (Ajax Push Engine) Official website : http://www.ape-project.org/ Git Hub : http://github.com/APE-Project/ -~----------~----~----~----~------~----~------~--~---
