Hello again! Ok, wildcard was not supported in either of my domain hosts. However instead of using a CNAME i am now using a wildcard on the A record instead, this seems to work, like this;
@ 3600 IN A xx.xx.xx.xx www 3600 IN A xx.xx.xx.xx ape 3600 IN A xx.xx.xx.xx *.ape 3600 IN A xx.xx.xx.xx This works as intended. Now I have another problem, 0.ape.mydomain.com returns a 500 server error from apache? What might be wrong? aped is running, .htaccess is in place, mod_proxy and rewrite is enabled, config.js looks nice....I am clueless right now :( On Sep 10, 10:53 am, Nicolas Trani <[email protected]> wrote: > Hi, > > you can create different subdomain and do not use a willcard but you > need to create a lot of subdomain for ape (0.ape.yourdomain.com, > 1.ape.yourdomain.com, 2.ape.yourdomain.com, .... 10.ape.yourdomain.com) > > If you don't expect to use session you can only create 0.ape.yourdomain.com > > Regards. > > Bjarman a écrit : > > > > > Ok, I think I have found what is wrong. The wildcard on the cname is > > not working. I think it is turned off in bind by default at my domain > > host.... > > > Is there any way to set APE up NOT using wildcards? > > > For instance, could i create 0.ape.mydomain.com, 1.ape.mydomain.com > > and get it up and running? > > > I just have access to a web form to configure my domain, I do not have > > direct access to the zone-file or to bind itself. > > > Ideas are more than welcome :/ > > > On Sep 10, 1:45 am, Bjarman <[email protected]> wrote: > > >> Ok, my installation is still not working. Here is my entire setup, > >> perhaps you can see what is wrong: > > >> ape.conf looks like this: > > >> uid { > >> # "aped" switch to this user/group if it run as root > >> user = www-data > >> group = www-data > > >> } > > >> Server { > >> port = 6969 > >> daemon = no > >> ip_listen = xx.xx.xx.xx (my external ip) > >> ip_local = xx.xx.xx.xx (my external ip again) > >> domain = mydomain.com > >> rlimit_nofile = 65536 > > >> } > > >> My config.js looks like this: > > >> APE.Config.baseUrl = 'http://mydomain.com/Source';//APEJSF > >> APE.Config.domain = 'mydomain.com'; //Your domain, must be the same > >> than the domain in aped.conf of your server > >> APE.Config.server = 'ape.mydomain.com'; //APE server URL > > >> My zonefile reads: > > >> @ A xx.xx.xx.xx > >> www A xx.xx.xx.xx > >> ape A xx.xx.xx.xx > >> *.ape CNAME ape > > >> My virtual host for sub domain "ape" looks like this: > > >> DocumentRoot "/srv/www/ape/htdocs" > >> Servername ape.mydomain.com > >> ServerAlias ape.mydomain.com > >> ServerAlias *.ape.mydomain.com > >> ProxyRequests Off > >> <Proxy *> > >> Order Deny,Allow > >> Allow from all > >> </Proxy> > > >> Problem:http://0.ape.mydomain.com/?script&it_works&anticachereturns > >> a "server not foud". Im guessing that the wildcard is not working. > > >> What am I doing wrong? > > >> On Sep 10, 1:32 am, John <[email protected]> wrote: > > >>> Exactly. But if you like to use a subdomain for your website you can > >>> do : > > >>> 1. Create a subdomain mydemo.mydomain.com > >>> 2. Upload JSF to mydemo.mydomain.com > >>> 3. Create a subdomain for the APE Server : ape.mydemo.mydomain.com > >>> 4. Put the correct URLs in the confs files (both JSF and Server) > >>> 5. Do the wildcard > > >>> This should work ;) > > >>> On Sep 10, 1:29 am, Bjarman <[email protected]> wrote: > > >>>> Hello, thanks for a swift reply (and sorry for the double post) > > >>>> Ok, if i understad correctly this is what i should do: > > >>>> 1. Upload JSF to mydomain.com > >>>> 2. Create a sub domain for ape, for instance ape.mydomain.com > >>>> 3. Make sure that the wildcard on the sub domain is working properly > > >>>> The first to seems to be straight forward but i suspect that i might > >>>> have a problem with the wildcard.... > > >>>> I will try this and hopefully it will work. > > >>>> On Sep 10, 1:20 am, John Chavarria <[email protected]> wrote: > > >>>>> Hello Bjarman, > > >>>>> (I also checked the email you've sent us to the ape-project contact > >>>>> email, even if you should use only mailing list for help :)) > > >>>>> Your problem is that you don't have set up a subdomain for the APE > >>>>> server itself. > > >>>>> I mean you're accessing to your demo through ape.yourdomain.com <= > >>>>> This is the URL of your website, but the APE server needs its own > >>>>> subdomain such as ape.ape.yourdomain.com > > >>>>> In your config.js it will looks like : > >>>>> APE.Config.baseUrl = 'http://ape.yourdomain.com/Source';//APEJSF > >>>>> APE.Config.domain = 'ape.yourdomain.com'; //Your domain, must be the > >>>>> same than the domain in aped.conf of your server > >>>>> APE.Config.server = 'ape.ape.yourdomain.com'; //APE server URL > >>>>> Don't forget you also need a wildcard for the APE server frequencies > >>>>> (0.ape.ape.yourdomain.com, 1.ape.ape.yourdomain.com ...) > >>>>> Hope I was able to help. > > >>>>> Regards, > > >>>>> John Chavarria > >>>>> Weelya - CEO / Graphic Designer > > >>>>>www.ape-project.orgwww.weelya.com > > >>>>> Le 10 sept. 2009 à 00:51, Bjarman a écrit : > > >>>>>> Hello all! > > >>>>>> I am a ape-noob with some problems. I have made the installation as > >>>>>> described herehttp://www.ape-project.org/wiki/index.php/Setupusing > >>>>>> apache. I have created the subdomains and also created the v-host. The > >>>>>> aped is up and running listening on 127.0.0.1:6969 according to > >>>>>> netstat. > > >>>>>> However, none of the demos are working, in fact all pages comes out > >>>>>> blank in my browser, no js-errors or anything, just plain blank? > > >>>>>> I understand if it is difficult to point me in the right direction but > >>>>>> any help is welcome. > > -- > Nicolas Trani - Web engineer > Weelya - Improve the webhttp://www.weelya.comhttp://www.ape-project.org --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "APE Project" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/ape-project?hl=en --- APE Project (Ajax Push Engine) Official website : http://www.ape-project.org/ Git Hub : http://github.com/APE-Project/ -~----------~----~----~----~------~----~------~--~---
