________________________________________________________________________
Updating RPKI Trust Anchor Configuration ________________________________________________________________________ APNIC has completed the process of transitioning from its previous Resource Public Key Infrastructure (RPKI) trust anchor arrangement to a new single trust anchor configuration. Each RIR will publish an 'all resources' global trust anchor, under which its own regional resources (IP addresses and ASNs) will be certified. What do I need to do? --------------------- If you are registering ROAs via MyAPNIC or the RPKI provisioning protocol, the process is unchanged and you do not need to make any changes. Existing ROAs will not be affected by the transition either. If you are using relying-party software, such as the Dragon Research Labs RPKI Toolkit or the RIPE NCC's RPKI Validator, you are advised to update your software's configuration to use only the current APNIC trust anchor, rather than the five APNIC trust anchors that were previously in use. Note: this update is not critical. However, if it is not done, the software will log or report warnings about being unable to retrieve the trust anchors that are no longer being used. For more information, please visit: https://blog.apnic.net/2018/02/27/updating-rpki-trust-anchor-configuration ________________________________________________________________________ APNIC Secretariat [email protected] Asia Pacific Network Information Centre (APNIC) Tel: 61 7 3858 3100 PO Box 3646 South Brisbane, QLD 4101 Australia Fax: 61 7 3858 3199 6 Cordelia Street, South Brisbane, QLD http://www.apnic.net ________________________________________________________________________ _______________________________________________ Apnic-announce mailing list [email protected] https://mailman.apnic.net/mailman/listinfo/apnic-announce _______________________________________________ apnic-talk mailing list [email protected] https://mailman.apnic.net/mailman/listinfo/apnic-talk
