I am having some trouble getting a dump of DOS onto my apple2. I have an
enhanced //e with a SSC, disk controller, and 80-col/64K expansion. I have
successfully gotten the serial link going and it appears as tho I can transfer
the DOS33.DMP file successfully into memory. However, when it gets to the
end of the dump, the apple remains in the monitor. The final screen has
the last bits of the input and:
9E02- A=BF X=02 Y=A0 P=B0 S=F0
My com1 setup is as follows:
Status for device COM1:
-----------------------
Baud: 300
Parity: None
Data Bits: 8
Stop Bits: 1
Timeout: ON
XON/XOFF: OFF
CTS handshaking: OFF
DSR handshaking: OFF
DSR sensitivity: OFF
DTR circuit: ON
RTS circuit: ON
I use Alt-A 6B to set up the SSC.
If you want to see the dump file, let me know and I can send it to you.
The documentation that came with the dump file insisted that the apple
would be back at the prompt with DOS 3.3 running and I just need to format
a disk. There is no troubleshooting section. I appreciate any feedback.
Thanks.
Jackman.
--
Apple2list is sponsored by <http://lowendmac.com/> and...
/ Buy books, CDs, videos, and more from Amazon.com \
/ <http://www.amazon.com/exec/obidos/redirect-home/lowendmac> \
Support Low End Mac <http://lowendmac.com/lists/support.html>
Apple2list info: <http://lowendmac.com/lists/apple2.html>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/apple2list%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
