> Thanks Bernie !!! You're a Champion!!! :-)
Thanks, now all I need to do is get it work again ;-) Michael has a
trimmed down version without the support for the FIFO trigger level
setting and I continued to change EPPPD (after starting from scratch) and
one day it stopped working. I haven't had time to try and go back through my
changes to a version that works yet but I will (hopefully).
> Therefore, two FIFO trigger level settings are required :
> 1. Theoretically optimum setting (FIFO trigger level = 8). [Existing]
> 2. Most reliable setting (FIFO trigger level = 1). [New]
None in between?
> Bernie - if you are having trouble connecting, perhaps you could
> try FIFO setting #2 to see if this works better for you?
On a 486DX2-80 that only acts as a relay between the modem and the LAN? I
think it's good enough as it is - and I haven't had any problems lately (I
think it may be the other end that gives the problem).
> PS. On the memory issue, an extra 10k requirement is still OK for
> me, although it is starting to be "difficult" for some people, I'm sure.
Those 10K is saved with my EPPPD version ;-)
//Bernie
http://bernie.arachne.cz/
