On Thu, 13 Jan 2000 18:50:55 -0500, Glenn McCorkle wrote: > Hi Michael, > On that Compaq that loads epppd.exe "high" but still won't place the > IP adress into ppp.log...... > in arachne.cfg change > [tcp/ip] > IP_Address PPP > to > [tcp/ip] > IP_Address BOOTP ----------------------- Glenn, It sure does work. I had the problem on three computers, I've fixed it on this IBM PS/1. Here by attachment, is my mem.txt. I have about as much conventional memory for Arachne now as I usually do on any of my setups using DOS 6.22<g>. > the time-online does not show. Instead it just says "TCP/IP" I'll get used to it. Thanks, Michael L. Dawley Pearl, Mississippi --Arachne 1.50 on IBM PS/1 486SX 25 Mhz 32MB Ram 130MB HDD-- -- Arachne V1.50;s.r.c., NON-COMMERCIAL copy, http://home.arachne.cz/
Modules using memory below 1 MB: Name Total = Conventional + Upper Memory -------- ---------------- ---------------- ---------------- SYSTEM 16,637 (16K) 16,621 (16K) 16 (0K) HIMEM 1,120 (1K) 1,120 (1K) 0 (0K) EMM386 4,144 (4K) 4,144 (4K) 0 (0K) COMMAND 3,776 (4K) 3,776 (4K) 0 (0K) COMMAND 3,200 (3K) 3,200 (3K) 0 (0K) COMMAND 3,184 (3K) 3,184 (3K) 0 (0K) SETVER 704 (1K) 0 (0K) 704 (1K) SMARTDRV 27,488 (27K) 0 (0K) 27,488 (27K) DMOUSE 17,120 (17K) 0 (0K) 17,120 (17K) EPPPD 70,160 (69K) 0 (0K) 70,160 (69K) Free 633,392 (619K) 623,072 (608K) 10,320 (10K) Memory Summary: Type of Memory Total = Used + Free ---------------- ---------- ---------- ---------- Conventional 655,360 32,288 623,072 Upper 125,808 115,488 10,320 Reserved 393,216 393,216 0 Extended (XMS) 32,380,048 1,324,176 31,055,872 ---------------- ---------- ---------- ---------- Total memory 33,554,432 1,865,168 31,689,264 Total under 1 MB 781,168 147,776 633,392 Largest executable program size 622,976 (608K) Largest free upper memory block 10,016 (10K) MS-DOS is resident in the high memory area.
