Hello all,
Installing 1.60b1 over 1.50 s.r.c:
I just realized that I got the 640x480 mode instead of the 800x600
that I tried in setup.
When I had 1.50, I had 800x600. I'm using Tseng ET4000, and checked
that in setup in the left column, and then checked 800x600 1MB
Highcolor in the right column. Didn't get it however, 640x480 was
installed.
Still works, however, and the graphics part of the setup program
in 1.60b1
gives you something to work with whereas 1.50 would require an
accurate graphics input during setup or else.
Since this box can use 800x600, the graphics in the Arachne browser
ie, the X-1, etc. are not quite as crisp looking using 640x480.
If all I am concerned with is the 800x600 vs 640x480, would I have
any complications returning to Arachne 1.50 by just installing 1.50
in the same directory as though it had an older version there?
Also, will the driver for the Tseng ET4000 be placed in later
beta's of Arachne?
Thanks,
Michael L. Dawley
Pearl, Mississippi
Any ideas?
-- This mail was written by user of Arachne, the Ultimate Internet Client
-- Arachne V1.60;b1, NON-COMMERCIAL copy, http://arachne.cz/
