On (I can't decode the date), Csaba Adam wrote:
> Hi Guenter,
>>> I have no problem in terminal mode, the manual authentication
>>> is OK, but when I turn to PPP mode, presently the connection is
>>> cut off.
>> which ComPorts have you installed in your machine?
> At present I use the COM1 for the modem and COM2 for the mouse.
>> ...or send part [dialer] and [tcp/ip] from arachne.cfg to this list.
> This is a part of my arachne.cfg:
> --------------- begin -------------------
> [profile]
> Profile ALBA.ACF
> Connection @epppd.exe >> PPP.LOG
> Hangup @termin.com 0x60 > NUL
> [dialer]
> DialPage file:ppp_init.htm
> Dialer @MINITERM.EXE > PPP.LOG
> TerminalWindow @MINITERM.EXE
> UseTerminal Yes
> Port 1
> Irq 4
> Base Default
> Mode 8N1
> Speed 115200
> InitString AT&F
> DialString ATDT
> PhoneNumber 06-51-343-025
> Autologin No
> WaitFor1
> Response1
> WaitFor2
> Response2
> WaitFor3
> Response3
> WaitFor4
> Response4
> PPPusername bleble
> PPPpassword bloblo
> [tcp/ip]
> IP_Address PPP
> IP_Grab IP address set to
> NameServer 194.151.0.157
> AltNameServer 194.151.0.156
> Gateway
> AltGateway
> Netmask 0.0.0.0
> TCPconfig PPPTCP.CFG
> ---------------- end ..........................
> That's all. I'm helpless. Maybe, you have an idea...
Hello Csaba,
your arachne.cfg looks ok. Because you make a modem connection, you don't
need an address for Gateway and AltGateway, may be ok.
You use a 'new' motherboard with 686 CPU and a lot of MHz. If your seriell
adapter card (if not onboard) is an old one, the 'Speed 115200' may be
too fast, only for testing try 9600 or 19200.
After your manual authentication, your ISP sends you something
like 'start your PPP protocol' have you pressed 'F7' or 'Ctrl-P' ?
Do you see a short DOS- message that the packet driver is
installed/ not installed ?
That's all of my ideas ;-)
Regard
Guenter Bietzig, Essen, Germany. Arachne BUG-,CRASH-,WISH-& LOVElist at:
Arachne Help Page http://home.germany.net/101/124262/gb.htm
