Chuck,
You need to tell Arachne you have VGA or better video card. Save your
currently arachne.cfg somewhere as backup, then do a *basic* setup again
.. I think you have to delete arachne.pck from your main Arachne
directory, and then Arachne will automatically start out in "initial
setup" mode. [You maybe should just move the file to somewhere else in
case I'm remember wrong.]
Telling Arachne what level video card you have in intial setup is *not*
the same as chosing default resolution in Options set-up, so changing
options won't help.
If Arachne doesn't recognize your video card as SVGA or whatever, you
can select manually the resolution on the screen IIRC ... and then
Arachne will continue and you should see then when Wizard shows up it
the screen is "full" ... if it is, you can quit the setup and copy your
currently working arachne.cfg back into the main directory and you
should be set to go.
l.d.
====
On Thu, 28 Sep 2000 23:03:57 +0000, Chuck McGill wrote:
> Hi Gang,
> At present Arachne fills about 4/5ths of my screen from right to left.
> The question is how do I get her to fill the screen?
> Thanks,
> Chuck
> -- This mail was written by user of Arachne, the Ultimate Internet Client
> -- Arachne V1.66, NON-COMMERCIAL copy, http://arachne.cz/
--
Join B'FOR - B'mothers For Open Records
<a href="http://www.b-for.org">B'FOR web site</a>
[Associate members of triad also welcome; membership confidential.]
Every member counts! We need numbers to produce valid statistics.
*******
A proud member of
<a HREF="http://www.phenomenalwomen.com/">Phenomenal Women Of The Web</a>
-- Arachne V1.64, NON-COMMERCIAL copy, http://arachne.cz/
