Hi list,
finally I got a successful connection with lsppp to the Czech server
QUICK.CZ. The solution was that I had to combine LSPPP with
Arachne's dialer MINITERM.EXE. Every time when I used LSPPP as a
dialer it failed during authentication. (On the other server
VOLNY.CZ it did the entire job without MINITERM). Here is the
successful configuration and resulting log:
****************************************************************
a) environment variable
-----------------------
SET lsppp=/n:2 /B:57600 /M:AT&F\V1 /N:194.228.2.1,194.228.2.35
/U:dialog /P:xxxxxxxxx /de:0971103333
b) Arachne.cfg
--------------
Connection @lh lspppd.exe>>PPP.LOG
Hangup @termin.com 0x60>NUL
Dialer @MINITERM.EXE>PPP.LOG
TerminalWindow @MINITERM.EXE
UseTerminal No
Port 2
Irq 4
Base 0x2e8
Mode 8N1
Speed 57600
InitString AT&F\V1
DialString ATX3DT,
PhoneNumber 0971103333
Autologin Yes
WaitFor1 name:
Response1 \u
WaitFor2 sword:
Response2 \p
WaitFor3
Response3
PPPusername dialog
PPPpassword xxxxxxxxxx
NameServer 194.228.2.1
AltNameServer 194.228.2.35
c) PPP.LOG reports:
-------------------
MINITERM 1.65 - external dialer for PPP/SLIP drivers. (c)2000 Arachne
Labs.
* Reading configuration file L:\ARACHNE.CFG
* Initializing modem. Press <Esc> to abort.
AT&F\V1
OK
* Dialing 0971103333. Press <Esc> to abort.
ATX3DT,0971103333
CONNECT 57600/V90/LAPM/V42BIS/28800:TX/49333:RX
* Autologin is enabled in ARACHNE.CFG. Use MINITERM.EXE -m to disable
it.
* Trying autologin. Press <Esc> to abort or <Alt+T> for terminal mode.
* [1] Waiting for: "name:"
User Access Verification
Username:
* [1] Received : "name:"
* [1] Answering : "dialog"
* [2] Waiting for: "sword:"
dialog
Password:
* [2] Received : "sword:"
* [2] Answering : "xxxxxxxx"
* Leaving MINITERM and trying SLIP/PPP. Press <Ctrl>+<Pause> to abort.
LADSoft PPP Packet Driver Ver 0.7 Copyright (c) LADSoft
Connecting to network...Authenticating...Negotiating IP linkage...
Connection open
Installed packet driver handler at vector 0x60
PPPD status: IP address set to 194.228.171.10
******************************************************************
... just in case that it is useful to somebody.
But now I have another question. It is related to the fact that I
call Arachne from dosshell. I made the experience that lsppp
stays in upper memory when I exit Arachne unless I hang up. When I
restart Arachne, she does not recognize that the packet driver is
already loaded and loads it for a second time. When I added lspppd /U
to arachne.bat the line was interrupted. Is there a way to remove
lsppp from memory without hanging up? Any DOS utility?
Regards
Christof Lange
_______________________________________________
Christof Lange <[EMAIL PROTECTED]>
Prokopova 4, 130 00 Praha 3, Czech Republic
phone: (+420-2) 22 78 18 00 / 22 78 20 02, telefax: 22 78 18 01
http://www.volny.cz/cce.zizkov
