If you stayed with in the path of arachne, the main or subdirectory,
would you still need a path.cfg, as long as your batch file (bat or ook)
returned you to Arachne directory at termi8nation?
On Mon, 26 Feb 2001 10:08:39 +0000, Alejandro Lieber wrote:
> On 25 Feb 01 at 3:12, Howard Eisenberger wrote:
>> On Sat, 24 Feb 2001 14:15:16 -0500,
>> "Samuel W. Heywood" <[EMAIL PROTECTED]> wrote:
>> >
>> > Sam Ewalt recently asked if there were some good ways to use Arachne's
>> > internet connection to run other DOS internet apps. There are many good
>> > ways of doing this. This is how I do it. I just shell out to DOS and run
>> > the following batch file:
>> Isn't it better to quit Arachne entirely without hanging up, run
>> the other Internet apps, and then re-start Arachne?
>> Howard E.
> I have a batch file (DOS 6.21) uses Netdial, then writes
> wattcp.cfg once, and then copies it to every subdirectory.
> Here is a part of it:
> ........
> epppd base 0x3F8 irq 4 pktvec 0x60 115200 asyncmap 0 crtscts
> call IP-UP.bat
> echo my_ip=%MYIP% > wattcp.cfg
> echo gateway=%remip% >> wattcp.cfg
> echo netmask=%netmask% >> wattcp.cfg
> echo nameserver=200.45.0.115 >> wattcp.cfg
> echo nameserver=200.45.0.116 >> wattcp.cfg
> echo domainslist="arnet.com.ar" >> wattcp.cfg
> echo TZ="+3" >> wattcp.cfg
> echo popuser="mlima" >> wattcp.cfg
> set myip=%MYIP%
> set dns=200.45.0.115
> copy wattcp.cfg c:\arachne
> copy wattcp.cfg c:\lynx
> copy wattcp.cfg c:\minuet
> copy wattcp.cfg c:\pmail
> copy wattcp.cfg c:\yarn\uka_ppp
> goto MENU
> ......
> From MENU I can start any of 5 programs and return to any other one
> several times.
> --------------------------------------
> Alejandro Lieber <[EMAIL PROTECTED]>
> Rosario Argentina
> --------------------------------------
-- Arachne V1.70;rev.3, NON-COMMERCIAL copy, http://arachne.cz/
