On Tue, 08 Jul 2003 03:03:51 +00, Bastiaan Edelman, PA3FFZ wrote: > Hi Glenn, this is working very fine, but... not if I connect to my own > homepage.
> Using ftp://username:[EMAIL PROTECTED]:21/ I get the 230 Welcome > screen and right after that the Arachne FTP screen. > (BTW the ":21" is inserted automatically. What does it mean?) > This screen however list no items although the starting directory "/" is > correct. :21 is the port number. (most FTP servers use port #21, most HTTP servers use port #80) > IMHO the server is waiting for a command. This is not an anonymous login > and I am allowed to upload (or even delete files) but of coarse I must > tell the server what I want to do... All of the correct commands *are* being sent. I just did a little "digging" and found the problem. (it's Bill Gates fault) ---- hetnet does not work (notice whos' server they use) ---- National Center for Supercomputing Applications Modified by the Educational Resources Center of Clarkson University FTP version 2.2/TC-D Packet driver (PPPD220F) Class 1 Type 0 Version b Extended 2 My Etheraddress: 0:2:12:0:56:34 Sending BOOTPs: (Press <SPACEBAR> to give up.) .Valid BOOTP Packet ReceivedBootP: Reply from server IP [68.22.80.29] BootP: My IP [68.22.81.25] Gateway IP [68.22.80.29] BootP: RFC1048 Style BootP Packet Received BootP: Subnet is 255.0.0.0 BootP: Adding Gateway number 1 IP 68.22.80.29 BootP: Adding Nameserver number 1 IP 68.22.80.2 BootP: Adding Nameserver number 2 IP 68.22.80.3 ftp> open home.hetnet.nl Domain asking server 68.22.80.2 for node home.hetnet.nl 220 hnftp01 Microsoft FTP Service (Version 5.0). Username: ____________ adobe works OK ----- National Center for Supercomputing Applications Modified by the Educational Resources Center of Clarkson University FTP version 2.2/TC-D Packet driver (PPPD220F) Class 1 Type 0 Version b Extended 2 My Etheraddress: 0:2:12:0:56:34 Sending BOOTPs: (Press <SPACEBAR> to give up.) .Valid BOOTP Packet ReceivedBootP: Reply from server IP [68.22.80.29] BootP: My IP [68.22.81.25] Gateway IP [68.22.80.29] BootP: RFC1048 Style BootP Packet Received BootP: Subnet is 255.0.0.0 BootP: Adding Gateway number 1 IP 68.22.80.29 BootP: Adding Nameserver number 1 IP 68.22.80.2 BootP: Adding Nameserver number 2 IP 68.22.80.3 ftp> open ftp.adobe.com Domain asking server 68.22.80.2 for node ftp.adobe.com 220 host-nyc1-1 FTP server (Version AdobeFTPD-2.1(1) Fri Jan 17 10:55:56 PST 200 3) ready. Username: _____________ CisNet works fine --- National Center for Supercomputing Applications Modified by the Educational Resources Center of Clarkson University FTP version 2.2/TC-D Packet driver (PPPD220F) Class 1 Type 0 Version b Extended 2 My Etheraddress: 0:2:12:0:56:34 Sending BOOTPs: (Press <SPACEBAR> to give up.) .Valid BOOTP Packet ReceivedBootP: Reply from server IP [68.22.80.29] BootP: My IP [68.22.81.25] Gateway IP [68.22.80.29] BootP: RFC1048 Style BootP Packet Received BootP: Subnet is 255.0.0.0 BootP: Adding Gateway number 1 IP 68.22.80.29 BootP: Adding Nameserver number 1 IP 68.22.80.2 BootP: Adding Nameserver number 2 IP 68.22.80.3 ftp> open www.cisnet.com Domain asking server 68.22.80.2 for node www.cisnet.com 220 ProFTPD 1.2.4 Server (ProFTPD) [68.22.80.45] Username: ______________ CDRom.com works fine ----- National Center for Supercomputing Applications Modified by the Educational Resources Center of Clarkson University FTP version 2.2/TC-D Packet driver (PPPD220F) Class 1 Type 0 Version b Extended 2 My Etheraddress: 0:2:12:0:56:34 Sending BOOTPs: (Press <SPACEBAR> to give up.) .Valid BOOTP Packet ReceivedBootP: Reply from server IP [68.22.80.29] BootP: My IP [68.22.81.25] Gateway IP [68.22.80.29] BootP: RFC1048 Style BootP Packet Received BootP: Subnet is 255.0.0.0 BootP: Adding Gateway number 1 IP 68.22.80.29 BootP: Adding Nameserver number 1 IP 68.22.80.2 BootP: Adding Nameserver number 2 IP 68.22.80.3 ftp> open ftp.cdrom.com Domain asking server 68.22.80.2 for node ftp.cdrom.com 220 drftp.digitalriver.com NcFTPd Server (licensed copy) ready. Username: ___________________ Lineo works fine ---- National Center for Supercomputing Applications Modified by the Educational Resources Center of Clarkson University FTP version 2.2/TC-D Packet driver (PPPD220F) Class 1 Type 0 Version b Extended 2 My Etheraddress: 0:2:12:0:56:34 Sending BOOTPs: (Press <SPACEBAR> to give up.) .Valid BOOTP Packet ReceivedBootP: Reply from server IP [68.22.80.29] BootP: My IP [68.22.81.25] Gateway IP [68.22.80.29] BootP: RFC1048 Style BootP Packet Received BootP: Subnet is 255.0.0.0 BootP: Adding Gateway number 1 IP 68.22.80.29 BootP: Adding Nameserver number 1 IP 68.22.80.2 BootP: Adding Nameserver number 2 IP 68.22.80.3 ftp> open ftp.lineo.com Domain asking server 68.22.80.2 for node ftp.lineo.com 220 atlas.lineo.com FTP server ready. Username: ___________________________ IMO, The evidence is overwhelming. 5 FTP servers, 4 work fine, 1 does not. The 1 which does not.... Is also the only one that's using MicroSoft FTP server. ______________________________ 2 tests needed to prove me wrong........ 1) Find a "non-Microsoft" server that gives us these same problems. 2) Find a MicroSoft server that works correctly. ------------------ Go for it. ;-) I'll bet a weeks pay check that you can't prove me wrong. ________________________________ > In the example you gave: ftp://ftp.lineo.com I get the same screen but > with a listing of the directory with files to click for downloading. As > anonymous caller I am only allowed to "LIST" or "Download". > LIST is automatic and download by clicking on the file. > CU, Bastiaan > On Mon, 07 Jul 2003 20:06:24 -0400, Glenn McCorkle wrote: >> On Mon, 07 Jul 2003 02:09:34 +00, Bastiaan Edelman, PA3FFZ wrote: >>> Hi Glenn, >>> I can live with Arachne not able to delete an FTP file... but >>> it would be nice to know how to activate the other functions like: >>> LIST >>> UPLOAD >>> DOWNLOAD >>> They are built in... nice, but how to activate? >> They happen 'automatically' when we vist an FTP site. >> ie: Visit ftp://ftp.lineo.com/ >> These 4 commands are sent via 'built-in ftp' >> 1) USER (anonymous) >> 2) PASS (your email address) >> 3) TYPE A (set transfer type to ASCII) >> 4) LIST (to list the directory contents of /) >> Now, link to the "pub" directory. >> 1) USER (anonymous) >> 2) PASS (your email address) >> 3) CWD (change directories to /pub/) >> 4) TYPE A (set transfer type to ASCII) >> 5) LIST (to list the directory contents of /pub/) >> Link to 'README' >> 1) USER (anonymous) >> 2) PASS (your email address) >> 3) TYPE A (set transfer type to ASCII) >> 4) RETR (to download README) >> Link on-through to.... >> ftp://ftp.lineo.com:21/pub/downloads/smea/sharp_lh79520_embedix_bdk.iso >> 1) USER (anonymous) >> 2) PASS (your email address) >> 3) TYPE I (set transfer type to BINARY) >> 4) RETR (to download the ISO CDROM image) >> -- >> Glenn >> http://arachne.cz/ >> http://www.delorie.com/listserv/mime/ >> http://www.cisnet.com/glennmcc/ >> http://www.cisnet.com/glennmcc/aqc/ -- Glenn http://arachne.cz/ http://www.delorie.com/listserv/mime/ http://www.cisnet.com/glennmcc/ http://www.cisnet.com/glennmcc/aqc/
