I do not think these two errors are the problem starting xorg: (WW) xf86OpenConsole: Could not save ownership of VT (WW) xf86OpenConsole: chown /dev/tty0 failed: No such file or directory
I still get these warnings evertyime I run X, but I am able to load x and kde, and use it just fine. On 2/23/06, lukas <[EMAIL PROTECTED]> wrote: > > Hey I tried this one and many more like xf86-input-mouse and there is > no change > any other clues please ? > > Cheers > Lukas > > > > I had encountered this error in the past. For me, the solution turned > > out that I had not installed any input drivers, including the keyboard > > (This was not a part of the standard xorg package, it had to be > > manually installed.) The package name is xf86-input-keyboard. > > > > On 2/23/06, luki <[EMAIL PROTECTED]> wrote: > >> > >> > >> Hey guys. > >> > >> Someone will be so kind and explain to me what is going on I can not > >> run my Xserver and configuration attemp of any kind fails as well. > >> Here is what I have in logs after runninng 'Xorg -configure': > >> > >> X Window System Version 7.0.0 > >> Release Date: 21 December 2005 > >> X Protocol Version 11, Revision 0, Release 7.0 > >> Build Operating System:Linux 2.6.15-ARCH i686 > >> Current Operating System: Linux Lukix 2.6.15-ARCH #1 SMP PREEMPT Tue Dec > >> 27 10:07:35 CET 2005 i686 > >> Build Date: 18 February 2006 > >> Before reporting problems, check http://wiki.x.org > >> to make sure that you have the latest version. > >> Module Loader present > >> Markers: (--) probed, (**) from config file, (==) default setting, > >> (++) from command line, (!!) notice, (II) informational, > >> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > >> (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 22 17:37:04 2006 > >> (II) Module ABI versions: > >> X.Org ANSI C Emulation: 0.2 > >> X.Org Video Driver: 0.8 > >> X.Org XInput driver : 0.5 > >> X.Org Server Extension : 0.2 > >> X.Org Font Renderer : 0.4 > >> (II) Loader running on linux > >> (II) LoadModule: "bitmap" > >> (II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so > >> (II) Module bitmap: vendor="X.Org Foundation" > >> compiled for 7.0.0, module version = 1.0.0 > >> Module class: X.Org Font Renderer > >> ABI class: X.Org Font Renderer, version 0.4 > >> (II) Loading font Bitmap > >> (II) LoadModule: "pcidata" > >> (II) Loading /usr/lib/xorg/modules/libpcidata.so > >> (II) Module pcidata: vendor="X.Org Foundation" > >> compiled for 7.0.0, module version = 1.0.0 > >> ABI class: X.Org Video Driver, version 0.8 > >> (--) using VT number 7 > >> > >> (WW) xf86OpenConsole: Could not save ownership of VT > >> (WW) xf86OpenConsole: chown /dev/tty0 failed: No such file or directory > >> (II) PCI: PCI scan (all values are in hex) > >> (II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 02 class 06,00,00 > >> hdr > >> 00 > >> (II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 02 class 06,04,00 > >> hdr > >> 01 > >> (II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 > >> hdr > >> 80 > >> (II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 > >> hdr > >> 00 > >> (II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 > >> hdr > >> 00 > >> (II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 > >> hdr > >> 00 > >> (II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 > >> hdr > >> 00 > >> (II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 > >> hdr > >> 00 > >> (II) PCI: 00:0a:0: chip 1274,1371 card 1274,1371 rev 02 class 04,01,00 > >> hdr > >> 00 > >> (II) PCI: 00:0b:0: chip 10ec,8139 card 1259,2503 rev 10 class 02,00,00 > >> hdr > >> 00 > >> (II) PCI: 00:0c:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 > >> hdr > >> 00 > >> (II) PCI: 01:00:0: chip 10de,002d card 1102,1023 rev 11 class 03,00,00 > >> hdr > >> 00 > >> (II) PCI: End of PCI scan > >> (II) Host-to-PCI bridge: > >> (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) > >> (II) Bus 0 I/O range: > >> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > >> (II) Bus 0 non-prefetchable memory range: > >> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > >> (II) Bus 0 prefetchable memory range: > >> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > >> (II) PCI-to-PCI bridge: > >> (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0088 (VGA_EN is set) > >> (II) Bus 1 non-prefetchable memory range: > >> [0] -1 0 0xe0000000 - 0xe1ffffff (0x2000000) MX[B] > >> (II) Bus 1 prefetchable memory range: > >> [0] -1 0 0xe2000000 - 0xe3ffffff (0x2000000) MX[B] > >> (II) PCI-to-ISA bridge: > >> (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is > >> set) > >> (--) PCI:*(1:0:0) nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 > >> Pro] rev 17, Mem @ 0xe0000000/24, 0xe2000000/25, BIOS @ 0xe1000000/16 > >> > >> *** If unresolved symbols were reported above, they might not > >> *** be the reason for the server aborting. > >> > >> Fatal server error: > >> Caught signal 11. Server aborting > >> > >> > >> The system is Arch with stock kern 2.6.15 Celeron Medocino 256 Ram and > >> RIVA TNT 2 any clues ? > >> > >> Cheers Lukas > >> > > _______________________________________________ > arch mailing list > [email protected] > http://www.archlinux.org/mailman/listinfo/arch > _______________________________________________ arch mailing list [email protected] http://www.archlinux.org/mailman/listinfo/arch
