> Look through lsmod, or dmesg | grep eth0 might also yield usefull > information.
[EMAIL PROTECTED] ~]$ dmesg | grep eth0 eth0: Broadcom 4400 10/100BaseT Ethernet 00:14:38:05:05:bd b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. eth0: no IPv6 routers present lsmod | grep -i tulip [EMAIL PROTECTED] ~]$ lsmod | grep -i b44 b44 22924 0 mii 5376 1 b44 So, am I right if I say that I use the mii network driver ? If so, both mii and tulip are broken under 2.6.17. Should we fill a bugreport now or rather wait for more similar problems ? > > Downgrading to 2.6.16 has been painful [...] > It shouldn't really be a big problem as long as you kept the old > package [...] Ahah.. right after `pacman -Syu`, I ran `pacman -Scc`. Actualy, the hardest part was to figure out that I made a typo in my /boot/grub/menu.lst.. Anyway, here I am :) Thanks for your help. _______________________________________________ arch mailing list [email protected] http://www.archlinux.org/mailman/listinfo/arch
