Hi, multiple solutions:
1. add modules in correct order to the MODULES array in rc.conf 2. Use udev rules to assign permanent symbolic names (like wireless0) Both explained in udev howto: http://wiki.archlinux.org/index.php/Udev Jürgen On Fri, Oct 20, 2006 at 08:02:44PM +0100, Daniel Bento wrote: > Hello, > I don't know if i'm sending this ask help message for the right place, > but i have one question... or better... a problem with arch. > > I'm using a laptop, centrino, and i have wlan and ethernet card and > IEEE-1394... the problem is... before install ipw2200 firmware, my > onboard ethernet card was always the device eth0 and the IEEE-1394. > After I install ipw200 firware and start to use my wireless card, > each boot, the devices "randomize", like: > one time i have eth0 = wireless, eth1 = onboardcard, eth2 = IEEE-1394 > other time i have eth0 = onboardcard, eth1 = wireless, eth2 = IEEE-1394 > they always change.. I don't understand why... > > And it is a little problematic because i use network profiles and i have > a lot of problem because of that.. i have always to if down connections > and if up with the right device! > > I don't know other information that can be useful to analise the > problem, i'm new here... > > Can you help me? > > Thanks in advance, > Daniel > > PS: sorry my bad english > > -- > Daniel Bento <[EMAIL PROTECTED]> > >> http://www.overdestiny.com > Grupo Astronomia-PT <[EMAIL PROTECTED]> > >> http://www.astronomia-PT.org > > Location @ 39.1670° N, -8.8830° E Alt 0 m > > _______________________________________________ > arch mailing list > [email protected] > http://www.archlinux.org/mailman/listinfo/arch
pgp9EN7Fo1Osd.pgp
Description: PGP signature
_______________________________________________ arch mailing list [email protected] http://www.archlinux.org/mailman/listinfo/arch
