Am Freitag, 20. Oktober 2006 15:02 schrieb Daniel Bento:
> Hello,
> I don't know if i'm sending this ask help message for the right place,
> but i have one question... or better... a problem with arch.
>
> I'm using a laptop, centrino, and i have wlan and ethernet card and
> IEEE-1394... the problem is... before install ipw2200 firmware, my
> onboard ethernet card was always the device eth0 and the IEEE-1394.
> After I install ipw200 firware and start to use my wireless card,
> each boot, the devices "randomize", like:
> one time i have eth0 = wireless, eth1 = onboardcard, eth2 = IEEE-1394
> other time i have eth0 = onboardcard, eth1 = wireless, eth2 = IEEE-1394
> they always change.. I don't understand why...
>
> And it is a little problematic because i use network profiles and i have
> a lot of problem because of that.. i have always to if down connections
> and if up with the right device!
>
> I don't know other information that can be useful to analise the
> problem, i'm new here...
>
> Can you help me?
>
> Thanks in advance,
> Daniel
>
> PS: sorry my bad english
Sounds like you might need to assign names with udev. There is an article in
the wiki on that:
http://wiki.archlinux.org/index.php/Udev#Mixed_Up_Devices.2C_Sound.2FNetwork_Cards_Changing_Order_Each_Boot
Hope it helps,
Björn
_______________________________________________
arch mailing list
[email protected]
http://www.archlinux.org/mailman/listinfo/arch
