[WARNING !! Long dmesg included]
Hi,
Here an overview of this new laptop know to be working with archlinux !
For info of future owners of this device or for info for developers.
Some small issues with sound with kernel 2.6.21-ARCH and alsa version
1.0.14rc2)
[EMAIL PROTECTED] pkg]# cat /etc/modprobe.conf
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.14rc2 ---
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
# --- END: Generated by ALSACONF, do not edit. ---
not all of the output and input is detected. So headphone jack does not
work. The sound via the speakers work though.
[EMAIL PROTECTED] pkg]# uname -a
Linux lappy 2.6.21-ARCH #1 SMP PREEMPT Sat Apr 28 10:43:58 CEST 2007
i686 Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz GenuineIntel GNU/Linux
superb install ! No hickups !
[DVD-RW detection OK ]
[EMAIL PROTECTED] pkg]# cdrecord -scanbus
scsibus1:
1,0,0 100) 'HL-DT-ST' 'DVDRAM GMA-4082N' 'HA01' Removable CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
[EMAIL PROTECTED] pkg]#
[Modules autodetected]
[EMAIL PROTECTED] proc]# lsmod
Module Size Used by
ohci_hcd 19588 0
nvidia 6828660 22
ipv6 253888 12
hci_usb 15132 0
bluetooth 46692 1 hci_usb
usbhid 36128 0
hid 24704 1 usbhid
ff_memless 5256 1 usbhid
eth1394 16772 0
snd_seq_oss 29184 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 46928 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
snd_pcm_oss 39072 0
snd_mixer_oss 14464 1 snd_pcm_oss
pcmcia 31404 0
joydev 8384 0
sdhci 15372 0
mmc_core 22404 1 sdhci
ohci1394 31920 0
ieee1394 84184 2 eth1394,ohci1394
yenta_socket 23564 1
rsrc_nonstatic 11264 1 yenta_socket
pcmcia_core 33048 3 pcmcia,yenta_socket,rsrc_nonstatic
rtc_cmos 7188 0
rtc_core 7684 1 rtc_cmos
rtc_lib 3456 1 rtc_core
ehci_hcd 31244 0
i2c_i801 7952 0
i2c_core 17792 2 nvidia,i2c_i801
sg 26652 0
psmouse 35336 0
serio_raw 5636 0
pcspkr 2944 0
uhci_hcd 22288 0
intel_agp 21532 1
agpgart 27736 2 nvidia,intel_agp
tsdev 6464 0
snd_hda_intel 232984 0
snd_pcm 68996 2 snd_pcm_oss,snd_hda_intel
snd_timer 19204 2 snd_seq,snd_pcm
snd 43876 8
snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer
soundcore 6496 1 snd
snd_page_alloc 7944 2 snd_hda_intel,snd_pcm
evdev 8192 4
thermal 11656 0
processor 24788 1 thermal
fan 3972 0
button 6288 0
battery 8580 0
ac 4100 0
ipw3945 202788 1
ieee80211 30664 1 ipw3945
ieee80211_crypt 4992 1 ieee80211
8139too 22784 0
mii 4992 1 8139too
usbcore 112136 6 ohci_hcd,hci_usb,usbhid,ehci_hcd,uhci_hcd
reiserfs 234240 2
sr_mod 14372 0
cdrom 34336 1 sr_mod
sd_mod 16768 4
ata_piix 11780 3
ata_generic 5636 0
libata 102420 2 ata_piix,ata_generic
[EMAIL PROTECTED] proc]#
Thermal and battery censors work flawless!
[NVIDIA Grafics OK ]
[EMAIL PROTECTED] pkg]# pacman -Qi nvidia
warning: current locale is invalid; using default "C"
localeName : nvidia
Version : 1.0.9755-5
URL : http://www.nvidia.com/
License : None
Groups : None
Provides : None
Depends On : kernel26 nvidia-utils
Removes : None
Required By : None
Conflicts With : nvidia-96xx nvidia-71xx nvidia-legacy
Installed Size : 7325.70 K
Packager : Tobias Powalowski <[EMAIL PROTECTED]>
Architecture : i686
Build Date : Sat Apr 28 12:13:56 2007 UTC
Build Type : Unknown
Install Date : Mon Apr 30 17:31:11 2007 UTC
Install Reason : Explicitly installed
Install Script : Yes
Description : NVIDIA drivers for kernel26.
[EMAIL PROTECTED] pkg]#
[hwd -e for modules load]
IDE interface
ata_piix : Intel Corp.|Mobile I/O Controller Hub SATA cc=IDE
Ethernet controller
8139too : Realtek Semiconductor|TTP-Monitoring Card V2.0
Network controller
ipw3945 : Intel Corporation|PRO/Wireless 3945ABG
VGA compatible controller
vesa : nVidia Corp.|Quadro NVS 110M / GeForce Go 7300
Audio device
snd-hda-intel : Intel Corp.|I/O Controller Hub High Definition Audio
Host bridge
intel-agp : Intel Corp.|Mobile Memory Controller Hub
ISA bridge
i8xx_tco : Intel Corp.|Mobile I/O Controller Hub LPC
PCI bridge
unknown : Intel Corp.|Mobile PCI Express Graphics Port
unknown : Intel Corp.|I/O Controller Hub PCI Express Port 1
unknown : Intel Corp.|I/O Controller Hub PCI Express Port 2
hw_random : Intel Corp.|82801 Hub Interface to PCI Bridge
CardBus bridge
yenta_socket : ENE Technology Inc.|CB1410 CardBus Controller
Generic system peripheral [0805]
unknown : Ricoh Co Ltd.|SD Card reader
System peripheral
unknown : Ricoh Co Ltd.|SD Card reader
unknown : Ricoh Co Ltd.|R5C592 Memory Stick Bus Host Adapter
unknown : Ricoh Co Ltd.|xD-Picture Card Controller
FireWire (IEEE 1394)
unknown : Ricoh Co Ltd.|xD-Picture Card Controller
USB Controller
unknown : Intel Corp.|I/O Controller Hub UHCI USB #1
unknown : Intel Corp.|I/O Controller Hub UHCI USB #2
unknown : Intel Corp.|I/O Controller Hub UHCI USB #3
unknown : Intel Corp.|I/O Controller Hub UHCI USB #4
unknown : Intel Corp.|I/O Controller Hub EHCI USB
SMBus
i2c-i801 : Intel Corp.|I/O Controller Hub SMBus
USB Human Interface Devices
usbhid : A4 Tech Co., Ltd|Optical Mouse WOP-35 / Trust 450L
Optical Mouse [/dev/input/mice]
USB Hub
hub : Virtual|Hub
hub : Virtual|Hub
hub : Virtual|Hub
hub : Virtual|Hub
hub : Virtual|Hub
USB Wireless
hci_usb : Foxconn Bluetooth 2.0 plus EDR
USB Vendor Specific Class
unknown : USB20 Camera
unknown : Fingerprint Sensor
Mouse
msintellips/2 : PS/2 Mouse port [/dev/psaux]
[EMAIL PROTECTED] pkg]#
[WIRELESS works flawless && NIC detection OK ]
[EMAIL PROTECTED] pkg]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0F:B0:CD:F7:31
inet addr:10.100.2.31 Bcast:10.100.2.25 Mask:255.255.255.0
inet6 addr: fe80::20f:b0ff:fecd:f731/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3051 errors:0 dropped:0 overruns:0 frame:0
TX packets:3504 errors:0 dropped:0 overruns:3 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2003794 (1.9 Mb) TX bytes:447724 (437.2 Kb)
Interrupt:19 Base address:0xe000
eth1 Link encap:UNSPEC HWaddr
00-02-3F-6A-90-40-45-A1-00-00-00-00-00-00-00-00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
eth2 Link encap:Ethernet HWaddr 00:18:DE:B2:38:9F
inet addr:10.100.2.32 Bcast:10.100.2.25 Mask:255.255.255.0
inet6 addr: fe80::218:deff:feb2:389f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:317 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:140237 (136.9 Kb) TX bytes:535 (535.0 b)
Interrupt:17 Base address:0x2000 Memory:d2000000-d2000fff
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4270 errors:0 dropped:0 overruns:0 frame:0
TX packets:4270 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1926862 (1.8 Mb) TX bytes:1926862 (1.8 Mb)
[EMAIL PROTECTED] pkg]#
[dmesg]
Linux version 2.6.21-ARCH ([EMAIL PROTECTED]) (gcc version 4.1.2) #1 SMP
PREEMPT Sat Apr 28 10:43:58 CEST 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009f800 end:
000000000009f800 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009f800 size: 0000000000000800 end:
00000000000a0000 type: 2
copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end:
0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000003fd90000 end:
000000003fe90000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000003fe90000 size: 0000000000070000 end:
000000003ff00000 type: 4
copy_e820_map() start: 000000003ff00000 size: 0000000000100000 end:
0000000040000000 type: 2
copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end:
00000000f0000000 type: 2
copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end:
00000000fec10000 type: 2
copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end:
00000000fed00400 type: 2
copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end:
00000000fed1a000 type: 2
copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end:
00000000fed90000 type: 2
copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end:
00000000fee01000 type: 2
copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end:
0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fe90000 (usable)
BIOS-e820: 000000003fe90000 - 000000003ff00000 (ACPI NVS)
BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
126MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f65b0
Entering add_active_range(0, 0, 261776) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 261776
early_node_map[1] active PFN ranges
0: 0 -> 261776
On node 0 totalpages: 261776
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 253 pages used for memmap
HighMem zone: 32147 pages, LIFO batch:7
DMI present.
ACPI: RSDP 000F6520, 0024 (r2 LENOVO)
ACPI: XSDT 3FE93C0B, 0084 (r1 PTLTD XSDT 32 LTP 0)
ACPI: FACP 3FE99D6E, 00F4 (r3 INTEL CALISTGA 32 ALAN 1)
ACPI: DSDT 3FE959A8, 4352 (r1 LENOVO TP-61 32 INTL 20050624)
ACPI: FACS 3FE9AFC0, 0040
ACPI: APIC 3FE99E62, 0068 (r1 INTEL CALISTGA 32 LOHR 5A)
ACPI: HPET 3FE99ECA, 0038 (r1 INTEL CALISTGA 32 LOHR 5A)
ACPI: MCFG 3FE99F02, 003C (r1 INTEL CALISTGA 32 LOHR 5A)
ACPI: TCPA 3FE99F3E, 0032 (r1 Phoeni x 32 TL 0)
ACPI: APIC 3FE99F70, 0068 (r1 PTLTD APIC 32 LTP 0)
ACPI: BOOT 3FE99FD8, 0028 (r1 PTLTD $SBFTBL$ 32 LTP 1)
ACPI: SSDT 3FE95359, 064F (r1 SataRe SataPri 1000 INTL 20050624)
ACPI: SSDT 3FE94CC7, 0692 (r1 SataRe SataSec 1000 INTL 20050624)
ACPI: SSDT 3FE9423D, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
ACPI: SSDT 3FE94197, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
ACPI: SSDT 3FE93C8F, 0508 (r1 PmRef CpuPm 3000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify
[EMAIL PROTECTED]
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists. Total pages: 259731
Kernel command line: root=/dev/sda1 vga=792 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1828.993 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032252k/1047104k available (2330k kernel code, 14200k reserved,
758k data, 268k init, 129600k highmem)
virtual kernel memory layout:
fixmap : 0xfff83000 - 0xfffff000 ( 496 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc040b000 - 0xc044e000 ( 268 kB)
.data : 0xc0346991 - 0xc04042ac ( 758 kB)
.text : 0xc0100000 - 0xc0346991 (2330 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3662.43 BogoMIPS
(lpj=7324872)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e3bd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06
SMP alternatives: switching to SMP codemonitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06
Total of 2 processors activated (7319.99 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=41
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #06 (-#09) is hidden behind transparent bridge #05 (-#05) (try
'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
Time: tsc clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
PCI: Failed to allocate mem resource #6:[EMAIL PROTECTED] for 0000:01:00.0
PCI: Bridge: 0000:00:01.0PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: d2000000-d20fffff
PREFETCH window: disabled.
PCI: Bus 6, cardbus bridge: 0000:05:04.0
IO window: 00002400-000024ff
IO window: 00002800-000028ff
PREFETCH window: 50000000-53ffffff
MEM window: 54000000-57ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 2000-2fff
MEM window: d2100000-d21fffff
PREFETCH window: 50000000-53ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1438k freed
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 6144k,
total 131072k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:d5c0
vesafb: pmi: set display start = c00cd5f6, set palette = c00cd660
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce
3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer deviceisapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI No-Shortcut mode
Freeing unused kernel memory: 268k freed
libata version 2.20 loaded.
ata_piix 0000:00:1f.2: version 2.10ac1
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0
irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8
irq 15
scsi0 : ata_piix
ata1.00: ATA-7: HTS541010G9SA00, MBZIC60R, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
scsi1 : ata_piix
ata2.00: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA HTS541010G9SA00 MBZI PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N HA01 PQ: 0 ANSI: 5
SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
ReiserFS: sda1: using ordered data mode
ReiserFS: sda1: journal params: device sda1, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sda1: checking transaction log (sda1)
ReiserFS: sda1: Using r5 hash to sort names
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 21 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:05:01.0 to 64
eth0: RealTek RTL8139 at 0xf885e000, 00:0f:b0:cd:f7:31, IRQ 19
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation
<[EMAIL PROTECTED]>
ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux,
1.2.0dmpr
ipw3945: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT 3FE94A09, 01F6 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
ACPI: SSDT 3FE9449C, 04E8 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 3FE94BFF, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
ACPI: SSDT 3FE94984, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
Time: hpet clocksource has been installed.
ACPI Exception (thermal-0412): AE_NOT_FOUND, Invalid active threshold
[0] [20070126]
ACPI: Thermal Zone [TZ00] (49 C)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1b.0 to 64
Linux agpgart interface v0.102 (c) Dave Jones
USB Universal Host Controller Interface driver v3.0
input: PC Speaker as /class/input/input5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
si3054: cannot initialize. EXT MID = 0000
agpgart: Detected an Intel 945GM Chipset.
intel_rng: FWH not detected
agpgart: AGP aperture is 256M @ 0x0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using uhci_hcd and address 2
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04753/0x200000
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xd2404000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
input: SynPS/2 Synaptics TouchPad as /class/input/input6
usb 1-2: device not accepting address 2, error -71
Yenta: CardBus bridge found at 0000:05:04.0 [17aa:2075]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:05:04.0, mfunc 0x01111c12, devctl 0x44
ieee1394: Initialized config rom entry `ip1394'
Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#05) from #05 to #09
pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
cs: IO port probe 0x2000-0x2fff: clean.
pcmcia: parent PCI bridge Memory window: 0xd2100000 - 0xd21fffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
PCI: Enabling device 0000:05:06.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 22 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:05:06.0 to 64
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]
MMIO=[d2100800-d2100fff] Max Packet=[2048] IR/IT contexts=[4/4]
sdhci: SDHCI controller found at 0000:05:06.1 [1180:0822] (rev 19)
PCI: Enabling device 0000:05:06.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:05:06.1[B] -> GSI 23 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:05:06.1 to 64
mmc0: SDHCI at 0xd2100400 irq 21 DMA
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
usb 5-4: new high speed USB device using ehci_hcd and address 4
usb 5-4: configuration #1 chosen from 1 choice
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f6a904045a1]
usb 2-1: new low speed USB device using uhci_hcd and address 2
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
usb 2-1: configuration #1 chosen from 1 choice
usb 1-2: new full speed USB device using uhci_hcd and address 4
usb 1-2: configuration #1 chosen from 1 choice
usb 3-2: new full speed USB device using uhci_hcd and address 2
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usb 3-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: A4Tech USB Optical Mouse as /class/input/input7
input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1d.1-1
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver hci_usb
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
Adding 498004k swap on /dev/sda2. Priority:-1 extents:1 across:498004k
Clocksource tsc unstable (delta = -131771310 ns)
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
hda_intel: azx_get_response timeout, switching to polling mode...
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26
23:21:15 PST 2007
eth0: no IPv6 routers present
eth2: no IPv6 routers present
[EMAIL PROTECTED] pkg]#
IO window: disabled.
MEM window: d0000000-d1ffffff
PREFETCH window: c0000000-cfffffff
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3657.56 BogoMIPS
(lpj=7315127)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e3bd 00000000 00000001
_______________________________________________
arch mailing list
[email protected]
http://archlinux.org/mailman/listinfo/arch
