On Thu, 30 Nov 2017, Peter Robinson wrote: > Sure, and we have a wiki basically anyone can edit, and even pages to > make notes for particular SoCs: > > https://fedoraproject.org/wiki/Architectures/ARM#Supported_Hardware_and_Devices
I put an initial starter in place; my initial work-plan is to simply work down through the RPi wiki-page and 'flesh it out' as to the XU4, etc https://fedoraproject.org/wiki/Architectures/ARM/exynos > It's very easy to say "I think this is what should happen" when you're > not the one that has to do the work. If you want to do the work and > step up and maintain the Exynos devices I'll happily assist I have both ODroid XU4 and HC1 kit, and know that I have hit something of an issue running without an SD card, and rather booting natively from the SATA interface. Another friend and I are working through this issue, as the price point on the (fanless, but with HUGE heat sink) HC1 hard to resist when putting together a silent operation device As I recall there was also a problem on the eMMC adapter, but that is not my present focus (there are both a sub-adapter to run through the SD card slot, as well as a native on-board connector for just the eMMC card) -- Russ herrold _______________________________________________ arm mailing list -- [email protected] To unsubscribe send an email to [email protected]
