Am 30.11.2017 um 16:59 schrieb R P Herrold: > On Thu, 30 Nov 2017, Peter Robinson wrote: > >> Sure, and we have a wiki basically anyone can edit, and even pages to >> make notes for particular SoCs: >> >> https://fedoraproject.org/wiki/Architectures/ARM#Supported_Hardware_and_Devices > I put an initial starter in place; my initial work-plan is to > simply work down through the RPi wiki-page and 'flesh it out' > as to the XU4, etc > > https://fedoraproject.org/wiki/Architectures/ARM/exynos > >> It's very easy to say "I think this is what should happen" when you're >> not the one that has to do the work. If you want to do the work and >> step up and maintain the Exynos devices I'll happily assist > I have both ODroid XU4 and HC1 kit, and know that I have hit > something of an issue running without an SD card, and rather > booting natively from the SATA interface. Another friend and > I are working through this issue, as the price point on the > (fanless, but with HUGE heat sink) HC1 hard to resist when > putting together a silent operation device > > As I recall there was also a problem on the eMMC adapter, but > that is not my present focus (there are both a sub-adapter to > run through the SD card slot, as well as a native on-board > connector for just the eMMC card) > > -- Russ herrold > _______________________________________________ > arm mailing list -- [email protected] > To unsubscribe send an email to [email protected]
Hello Rus, that looks fine. I have also both devices and I'm very interested running fedora on it. If there is something I can help, please ask. Andreas _______________________________________________ arm mailing list -- [email protected] To unsubscribe send an email to [email protected]
