On Tue, Mar 13, 2018 at 1:51 PM, sakurai <saku...@pugpug.org> wrote:
> 2018-03-13 8:18 GMT+09:00 Peter Robinson <pbrobin...@gmail.com>:
>> On Mon, Mar 12, 2018 at 10:47 PM, sakurai <saku...@pugpug.org> wrote:
>>> Hi Peter,
>>>
>>> Thank you for your prompt comment.
>>> I removed uEnv.txt but following message was displayed.
>  (snip)
>>
>> I don't know what you've done to now, you're likely possibly better
>> off starting again with arm-image-installer to setup the image again
>> with am335x_evm and then try booting with the boot button held down.
>
> I tried again using arm-image-installer by following command.
>
>> fedora-arm-image-installer --image=Fedora-Server-armhfp-27-1.6-sda.raw.xz 
>> --target=am335x_evm --media=/dev/sdd --norootpass --resizefs --addconsole 
>> --selinux=off
>
> Not am335x_boneblack? Anyway I installed using arm335x_evm this time.
>
> My boot loader may be new because Angstrom will not boot without
> holding the boot button.
>
>> You might also want to give the full output.
>
> Here is the full output.
>
> U-Boot SPL 2013.04-dirty (Jun 19 2013 - 09:57:14)
> musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
> musb-hdrc: MHDRC RTL version 2.0
> musb-hdrc: setup fifo_mode 4
> musb-hdrc: 28/31 max ep, 16384/16384 memory
> USB Peripheral mode controller at 47401000 using PIO, IRQ 0
> musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
> musb-hdrc: MHDRC RTL version 2.0
> musb-hdrc: setup fifo_mode 4
> musb-hdrc: 28/31 max ep, 16384/16384 memory
> USB Host mode controller at 47401800 using PIO, IRQ 0
> OMAP SD/MMC: 0
> mmc_send_cmd : timeout: No status update
> reading u-boot.img
> reading u-boot.img
>
>
> U-Boot 2013.04-dirty (Jun 19 2013 - 09:57:14)

As Dennis had already stated this isn't Fedora's u-boot, what you see
is as I would expect, basically the problem here is dealing with the
boot button correctly.
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-le...@lists.fedoraproject.org

Reply via email to