On 02.12.22 at 11:51 Michal Suchánek wrote:
On Fri, Dec 02, 2022 at 10:42:08AM +0100, Johannes Kastl wrote:
I take it that would mean building the grub2 package and tweaking the settings somewhere?There is some grub2-mkimage or something to do that, you don't need to rebuild the package. Looking at how it is done during build might be helpful for producing similar results, though.
OK, I'll try that if time permits.
Sounds like it is not worth the hassle to support the board. Even if grub2 can be modified to never hang AND u-boot can be configured to reboot instead of waiting forever, I may still end up with a device that will just boot forever and will not be usable in a normal way.On one hand I would see it that way. On the other it exposes in the extreme the problems you would run into when trying to make a system reliably boot always, and the work you do here may be useful to others in other situations if you document it. YMMV
I will try to find some time to dig around. But the time might be better spent by adding paragraph to the Pine64 entry in the Wiki, stating the current (unreliable) state of support for this device.
Kind Regards, Johannes P.S.: And if I did not mention this clearly enough: Thanks a lot for your help! -- Johannes Kastl Linux Consultant & Trainer Tel.: +49 (0) 151 2372 5802 Mail: [email protected] B1 Systems GmbH Osterfeldstraße 7 / 85088 Vohburg http://www.b1-systems.de GF: Ralph Dehner Unternehmenssitz: Vohburg / AG: Ingolstadt,HRB 3537
OpenPGP_signature
Description: OpenPGP digital signature
