> From: Heinrich Rebehn <heinrich.reb...@rebehn.net> > Date: Tue, 13 Feb 2018 17:57:32 +0100 > > Hello List, > > I am trying to install current snapshot on a Raspberry 3 B. I have > problems setting up the serial communication needed to access the > installer. I connected the serial pins (6,8,10) to the serial port > of my PC and set parameters to 115200/8N1. But I only see garbage on > the screen. While googling for a solution I found some hints about > the Raspi using bizarre baud rates depending on the system clock. > > Following is my boot/config.txt with the core_freq line added by me: > > arm_control=0x200 > enable_uart=1 > core_freq=250 > device_tree_address=0x100 > kernel=u-boot.bin > > Of course I tried different baud rates, but to no avail. I am using > minicom on a intel PC running Mac OS. > > Is this still a known issue? I found no hints about this in the > OpenBSD install documents for ARM. > > Can someone please help?
Does adding init_uart_baud=115200 to config.txt help? In any case, please tell us more about what version of OpenBSD you're using.