On Tue, May 18, 2021 at 05:02:06PM +0000, Romain Gentile wrote: > Thanks for your answer ! > > I must be doing something wrong... Because when using > u-boot-aarch64-2021.04/share/u-boot/pinebook-pro-rk3399/idbloader.img > and u-boot.itb from the same directory, both from the archive you've sent me, > I still get the same error during boot process. > > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > On Tuesday, May 18, 2021 3:05 PM, Patrick Wildt <patr...@blueri.se> wrote: > > > Am Tue, May 18, 2021 at 10:55:04AM +0000 schrieb Romain Gentile: > > > > > Hello, > > > I'm trying to install OpenBSD 6.9 on the Pinebook Pro, > > > and I am running into the following issue when booting the system from an > > > sd card: > > > bwfm0: failed loadfirmware of file > > > brcmfmac43456-sdio.rockchip,rk3399-evb.bin > > > > Sounds like you got the wrong u-boot. Otherwise it would say > > pine64,pinebook-pro and not rockchip,rk3399-evb. > > > > You should be able to extract a recent pre-built version from here: > > > > http://cdn.openbsd.org/pub/OpenBSD/snapshots/packages/aarch64/u-boot-aarch64-2021.04.tgz > > > > > I used the latest u-boot version from https://github.com/u-boot/u-boot > > > and the latest version of the ATF from > > > https://github.com/ARM-software/arm-trusted-firmware. > > > How could it be solved this ? > > > Many thanks ! > >
The bwfm0: error line above is due to not having run fw_update after the machine was installed. Note: bwfm(4) on this machine is a little flaky. I've found that disabling it via ukc and using an external usb wifi dongle is more reliable. Does the machine complete the boot after that error line? -ml
