On January 22, 2026 5:03:40 PM GMT-03:00, Sylvain Saboua <[email protected]>
wrote:
>So I got a new RK3399. I have done everything I expected but it won't
>boot the openbsd SD card yet.
>
>Upon receiving the card I plugged in and attempted :
>
>(using linux_upgrade_tool the proprietary equivalent of rkdeveloptool)
>
>Rockusb>EF
>No found loader item from config!
>Rockusb>ef
>/run/media/sylvain/saboua/hax/ffly/obsd_u-boot_firefly-rk3399/u-boot-rockchip.bin
>Loading loader...
>Loading loader failed,err=-6!
>Rockusb>ef
>/run/media/sylvain/saboua/hax/ffly/obsd_u-boot_firefly-rk3399/idbloqder.img
>Loading loader...
>Loading loader failed,err=-1!
>Rockusb>/run/media/sylvain/saboua/hax/ffly/obsd_u-boot_firefly-rk3399/u-boot.itb
>Rockusb>
>
>Should I understand that the last attempt worked ? ...
>
>Here's what I get on the UART interface upon rebooting the card :
>
>DDR Version 1.12 20180518
>In
>Channel 0: DDR3, 800MHz
>Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
>Channel 1: DDR3, 800MHz
>Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
>256B stride
>ch 0 ddrconfig = 0x101, ddrsize = 0x2020
>ch 1 ddrconfig = 0x101, ddrsize = 0x2020
>pmugrf_os_reg[2] = 0x3AA17AA1, stride = 0xD
>OUT
>Boot1: 2018-04-08, version: 1.12
>CPUId = 0x0
>ChipType = 0x10, 215
>SdmmcInit=2 0
>BootCapSize=100000
>UserCapSize=14910MB
>FwPartOffset=2000 , 100000
>mmc0:cmd5,32
>SdmmcInit=0 0
>BootCapSize=0
>UserCapSize=30436MB
>FwPartOffset=2000 , 0
>StorageInit ok = 196700
>LoadTrustBL
>Addr:0x4000 No find trust.img!
>LoadTrustBL error:-3
>LoadTrustBL
>No find bl30.bin
>Load uboot, ReadLba = 2000
>Load OK, addr=0x200000, size=0xa912c
>RunBL31 0x10000
>NOTICE: BL31: v1.3(debug):65aa5ce
>NOTICE: BL31: Built : 10:47:37, Jun 19 2018
>NOTICE: BL31: Rockchip release version: v1.1
>INFO: GICv3 with legacy support detected. ARM GICV3 driver
>initialized in EL3
>INFO: Using opteed sec cpu_context!
>INFO: boot cpu mask: 0
>INFO: plat_rockchip_pmu_init(1151): pd status 3e
>INFO: BL31: Initializing runtime services
>INFO: BL31: Initializing BL32
>INF [0x0] TEE-CORE:init_primary_helper:337: Initializing
>(1.1.0-170-gc4654a6 #16 Wed May 30 08:54:30 UTC 2018 aarch64)
>
>INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2
>
>INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
>INFO: BL31: Preparing for EL3 exit to normal world
>INFO: Entry point address = 0x200000
>INFO: SPSR = 0x3c9
>
>
>U-Boot 2014.10-RK3399-06 (Jan 25 2019 - 17:16:32)
>
>CPU: rk3399
>cpu version = 0
>CPU's clock information:
> aplll = 816000000HZ
> apllb = 24000000HZ
> gpll = 800000000HZ
> aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ,
>pclk_periph_h = 33333333HZ
> aclk_periph_l0 = 100000000HZ, hclk_periph_l0 =
>100000000HZ, pclk_periph_l0 = 50000000HZ
> hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
> cpll = 800000000HZ
> dpll = 800000000HZ
> vpll = 24000000HZ
> npll = 24000000HZ
> ppll = 676000000HZ
>Board: Rockchip platform Board
>Uboot as second level loader
>DRAM: Found dram banks: 1
>Adding bank:0000000000200000(00000000ffe00000)
>Reserve memory for trust os.
>dram reserve bank: base = 0x08400000, size = 0x01e00000
>128 MiB
>SdmmcInit = 0 0
>SDCard Update.
>storage init OK!
>Using default environment
>
>GetParam
>W: Invalid Parameter's tag (0xFFFFFFFF)!
>Invalid parameter
>No pmic detect.
>CPU's clock information:
> aplll = 816000000HZ
> apllb = 24000000HZ
> gpll = 800000000HZ
> aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ,
>pclk_periph_h = 33333333HZ
> aclk_periph_l0 = 100000000HZ, hclk_periph_l0 =
>100000000HZ, pclk_periph_l0 = 50000000HZ
> hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
> cpll = 800000000HZ
> dpll = 800000000HZ
> vpll = 24000000HZ
> npll = 24000000HZ
> ppll = 676000000HZ
>misc partition not found!
>SecureBootEn = 0, SecureBootLock = 0
>
>#Boot ver: 0000-00-00#0.00
>empty serial no.
>normal boot.
>no fuel gauge found
>no fuel gauge found
>read logo on state from dts [0]
>no fuel gauge found
>'recovery' does not seem to be a partition nor an address
>Unable to boot:recovery
>try to start backup
>'backup' does not seem to be a partition nor an address
>Unable to boot:backup
>try to start rockusb
Hi,
It wasn't clear to me if you have the U-boot for it. Do you?
I had issues with 7.8 install media for arm. For orange pi 5 plus, as an
example, the 7.7 works fine.
You can dd it to a sdcard and write the U-boot to it. Works for me.
If you plan to install to another media, here the install media on usb flash
and U-boot on the sdcard works fine. Then in the install process you can choose
the desired media upon the available ones.
Tried this on R4SE, R5S, Rpi5 and orange pi 5 plus.
--
"We will call you Cygnus,
the God of balance you shall be."
