On 01/01/2012 01:25 PM, Stuart Winter wrote:
I set it back to 3.1.2 and it boots fine.
Do you have the same memory location settings as in the INSTALL_KIRKWOOD
doc?
I've seen this before when there's not enough RAM been allocated.
GuruPlug>> printenv bootcmd_slk
bootcmd_slk=usb start;fatload usb 1:1 0x01100000 uinitrd-kirkwood-3.1.5;fatload
usb 1:1 0x00800000 /uImage-kirkwood-3.1.5;bootm 0x00800000 0x01100000
For installation to a *USB* disc:
Marvell>> setenv bootcmd_slk 'usb start;ext2load usb 0:1 0x01100000
/uinitrd-kirkwood;ext2load usb 0:1 0x00800000 /uImage-kirkwood;bootm 0x00800000
0x01100000'
--
=== Never ask a geek why, just nod your head and slowly back away.===
+================================+==================================+
| John O'Donnell | |
| (Sr. Systems Engineer, | http://juanisan.homeip.net |
| Net Admin, Programmer, etc.) | E-Mail: [email protected] |
+================================+==================================+
No man is useless who has a friend, and if we are loved we are
indispensable. -- Robert Louis Stevenson
_______________________________________________
ARMedslack mailing list
[email protected]
http://lists.armedslack.org/mailman/listinfo/armedslack
