1.82 appears to be for V6.
1.81 seems to be doing the trick. I shall have a play
around and start learning the ways of ARSPerl.
Thanks again Frank, you've been a star.
Cheers,
Gary
From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of Frank Caruso
Sent: 28 September 2006 13:10
To: [email protected]
Subject: Re: OT:ARSPerl - Error while installing
http://prdownloads.sourceforge.net/arsperl/arsperl_182.zip?download
On 9/28/06, Chapman,
Gary <[EMAIL PROTECTED]>
wrote:
**__20060125_______________________This posting was submitted with HTML in it___Hi Frank,ARSPerl installed perfectly this time, however, It seems to be for V6.3. Being the fool I am, I realised that I did not include details of the version I am running, which is 5.01.02.I checked the site where you pointed me to last time and can see that there is version 1.81 which will probably install in the same way. Is this the latest version that will work with 5.01?Thanks again for your help, very much appreciated.Cheers,Gary
** There are two different builds of ARS Perl. If you use the link I provided it will give the PPM version which only contains two files. There are others which contian the complete distribution.
From: Action Request System discussion list(ARSList) [mailto:[email protected]] On Behalf Of Frank Caruso
Sent: 27 September 2006 16:10
To: [email protected]
Subject: Re: OT:ARSPerl - Error while installing
On 9/27/06, Chapman, Gary <[EMAIL PROTECTED]> wrote:**__20060125_______________________This posting was submitted with HTML in it___Hi Frank,I tried that as suggested but that was the version I have already tried. I may have misunderstood but I had many more than 2 files and none were .ppd.Thanks anyway,Gary
** If you are doing this on a Windows platform then you can make is a bit easier for yourself by using a Perl build from www.activestate.com. Download and install it. Then get ARSPerl from this link:
From: Action Request System discussion list(ARSList) [mailto:[email protected]] On Behalf Of Frank Caruso
Sent: 27 September 2006 15:44
To: [email protected]
Subject: Re: OT:ARSPerl - Error while installing
http://prdownloads.sourceforge.net/arsperl/arsperl_184_63.zip?download
I put the ZIP in the same folder as Perl (C:\Perl).
Unpack its contents, two files, and the alter the .ppd file removing the "x86/" reference.
From a DOS prompt in the C:\perl folder type "ppm install ars184_63.ppd".
This works for me and I've installed perl and ARS Perl a bunch of times.
Hope this helps.
On 9/27/06, Thilo Stapff <[EMAIL PROTECTED]> wrote:The ARSperl Makefile.PL has problems handling directory names containing
space characters (in this case "Program Files" and "AR System").
As a workaround, you might copy the "Api" directory to some other
location and compile against this copy.
Regards,
Thilo Stapff
Chapman, Gary schrieb:
> **
> Hi Listers,
>
> I wonder if some one could help me with an issue I have while attempting
> to run the makefile.pl for ARSPerl.
> I get the following error: -
>
> /Generating serverTypeInfoHints.h ..
> The system cannot find the file specified.
> something went wrong when i ran "E:\Perl\bin\perl.exe infra/exsi.pl <
> E:/Program
> Files/AR System/Arserver/Api/include/ar.h > serverTypeInfoHints.h " (rv
> = 256, e
> xpected 0) at E:\Perl\ARSperl-1.85\Makefile.PL line 213./
>
> I am just learning PERL so I can imagine it's something I'm doing
> horribly wrong.
>
> Thanks in advance,
> * *
>
> *Regards,
> Gary Chapman*
> *Application Support*
>
> T +44(0)1908 696000
> D +44(0)1908 257446
>
> F +44(0)1908 692791
>
> E _gary.chapman@ imserv.invensys.com _
> W _http://www.imserv.invensys.com_ <http://www.imserv.invensys.com/>
>
> IMServ Europe Ltd
> Scorpio Rockingham Drive Linford Wood Milton Keynes MK14 6LY
> Registered in England and Wales No.2749624
> Registered Address: Invensys Portland House Stag Place London SW1E 5BF
>
> Disclaimer Notice
> This message/attachment(s) are CONFIDENTIAL and may contain LEGALLY
> PRIVILEGED information. If this message/attachment(s) were not intended
> for you please contact the sender IMMEDIATELY and delete this
> message/attachment(s) from your computer. You must not copy, forward or
> disclose the contents of this message/attachment(s) to any other person.
> The views/opinions in this message are solely of the author and do not
> necessarily represent those of the company. Please check this
> message/attachment(s) for the presence of viruses. No liability for any
> damage caused by any virus transmitted by this message/attachment(s) is
> accepted by the company.
>
>
> __20060125_______________________This posting was submitted with HTML in
> it___
_______________________________________________________________________________
UNSUBSCRIBE or access ARSlist Archives at http://www.wwrug.org
--
Frank Caruso
Specific Integration, Inc.
Senior Remedy Engineer
www.specificintegration.com
703-376-1249 __20060125_______________________This posting was submitted with HTML in it___
--
Frank Caruso
Specific Integration, Inc.
Senior Remedy Engineer
www.specificintegration.com
703-376-1249 __20060125_______________________This posting was submitted with HTML in it___
--
Frank Caruso
Specific Integration, Inc.
Senior Remedy Engineer
www.specificintegration.com
703-376-1249 __20060125_______________________This posting was submitted with HTML in it___ __20060125_______________________This posting was submitted with HTML in it___
