Mary,

The only other thing of note so far was a change in behavior in the User
Tool... I'm not sure which is correct, the new or the old... however, it had
been working consistently up until patch002, but not since ('broken' in
patches 003 and 004). 

In any case, it is no longer possible to use a read-only enum column in a
table-field in the run-if of an active link... it's possible that this is
only when in a table loop guide.  Our solution was to set a R/O enum field
on the form rather than the column, and that worked.  

Other than that, we're still testing it all out.

Good luck!

Matt R.

-----Original Message-----
From: Action Request System discussion list(ARSList)
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Tuesday, September 04, 2007 8:43 PM
To: [email protected]
Subject: Re: ARS 7.01 -P4

Thank you Matt.  It did indeed fix the issue.  Any other issues have you
encountered?  We also applied CMDB 2.0.1 P 3 and SLM 7.0.3 on our dev.

~Mary

949-975-5180 ext - 55180


                                                                           
             Matt Reinfeldt                                                
             <[EMAIL PROTECTED]                                             
             FELDT.COM>                                                 To 
                                       [email protected]                 
             Sent by: "Action                                           cc 
             Request System                                                
             discussion                                            Subject 
             list(ARSList)"            Re: ARS 7.01 -P4                    
             <[EMAIL PROTECTED]                                             
             ORG>                                                          
                                                                           
                                                                           
             09/04/2007 05:56                                              
             PM                                                            
                                                                           
                                                                           
             Please respond to                                             
             [EMAIL PROTECTED]                                             
                    RG                                                     
                                                                           
                                                                           




Mary,

Try reinstalling the arserver with the one that was published on 8/30 (last
Thursday).  We went through the same experience in our development
environment.  Installing the "latest" AR Server 7.0.1 Patch004 resolved it.

Good luck,

Matt R.

-----Original Message-----
From: Action Request System discussion list(ARSList)
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Tuesday, September 04, 2007 7:50 PM
To: [email protected]
Subject: Re: ARS 7.01 -P4

Hi,

We installed ARS 7.0.1 P 4 on our dev env yesterday.  The installation went
well w/o errors.  HOWEVER, we found a big issue, the Admin tool (P 4)
crashes everytime
we open the field properties on any form, any field.  Submitted a service
request with BMC support today and have not heard anything back yet.

Any one else experienced the same issue?

Thanks,

~Mary

949-975-5180 ext - 55180



             patrick zandi
             <[EMAIL PROTECTED]
             COM>                                                       To
                                       [email protected]
             Sent by: "Action                                           cc
             Request System
             discussion                                            Subject
             list(ARSList)"            ARS 7.01 -P4
             <[EMAIL PROTECTED]
             ORG>


             08/22/2007 07:06
             AM


             Please respond to
             [EMAIL PROTECTED]
                    RG






**
Anyone install this yet ? even a little, and play?
Any Complaints ?

ENV: Win 2003 /SP2

--
Patrick Zandi
__20060125_______________________This posting was submitted with HTML in
it___

____________________________________________________________________________

___
UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where
the
Answers Are"

____________________________________________________________________________
___

UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where
the Answers Are"

____________________________________________________________________________
___
UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the
Answers Are"

_______________________________________________________________________________
UNSUBSCRIBE or access ARSlist Archives at www.arslist.org ARSlist:"Where the 
Answers Are"

Reply via email to