<rant>
 
Remedy Maniac <facetious>if that is your name</facetious>,
 
In your first email from this thread, you said "I installed aradmin
Version 7.1.00...   ...since then any other aradmin tool (6.3 and 6.01)
crashes when I try to open a form."  That would seem to point to the
problem starting as a result of your install.
 
Now you say "The problem has been solved and has gone as it came. I
don't know why and I actually do not care about the technical reasons."
To your grandma's point:  What have you learned?
 
In Nietzsche's Twilight of the Idols, his 7th maxim was "What does not
destroy me, makes me stronger."  How has this made you stronger?
 
In my humble opinion: ARSList is a group of persons who have a common
interest in Remedy.  It is a forum for the exchange of (often good)
information geared from the newbie to the expert user.  Questions range
from the basic, to the very advanced and specific questions.  Some
participants ask questions, some answer them, some do both, and some
just read the posts.  It has something for a lot of people.
 
In this case, you seem to have broken your system, done no basic
troubleshooting to fix it yourself, asked the ARSList how to fix it,
received a couple answers on that, possibly acted on those answers, and
then left things without any kind of explanation as to what happened, or
so much as a thank you for those who tried to or did in fact help you.
Here are the problems I see with that:
 
1 - Other people may have similar problems, and may benefit from knowing
what ultimately fixed your issue.  You're not required to contribute in
some small way, but it would be good karma if you did.  
 
2 - If this did genuinely fix itself on it's own, you've got an
intermittent problem.  By not bothering to understand what caused it or
what fixed it, you don't know that it won't happen again, possibly when
you need to use the ARAdmin tool on a production server.
 
As long as you're citing Twilight of the Idols, Nietzsche's third
question of conscience was "Are you one who looks on? Or one who lends a
hand? Or one who looks away and walks off?"  Thanks for letting us know
your problem is solved, but without bothering to say how, it would seem
you are one who looks away and walks off.
 
Hopefully the next problem you encounter fixes itself, as the help from
the contributors of this list may not be so quick coming.
 
</rant>
 
Eric Cleereman

  _____  

From: Action Request System discussion list(ARSList)
[mailto:[EMAIL PROTECTED] On Behalf Of Remedy Maniac
Sent: Tuesday, April 15, 2008 9:59 AM
To: arslist@ARSLIST.ORG
Subject: Re: aradmin crashes


** why do you guys get so exited about small things?!?
First rule my grandma taught me: "if you don't try you will never learn"
Second rule is from Nitzsche. You know the philosopher: "everything that
doesn't kill you, makes you stronger"
I don't believe the admin tool could break your server. Someone else
does have anything to add on this? I think it will appreciated by
everyone.

For your info Susan: I am using the admin tool and the user tool both in
version 6.3 latest patch against a server version 6.00.01 patch 1454.
This for at least one year without any issue against my server.
You could even run 2 different versions of the admin tool against a
lower server. At the same time ;-)
Finally, Warren, just to put you at rest: there is no need to hack the
Windows registry.
The problem has been solved and has gone as it came. I don't know why
and I actually do not care about the technical reasons, but as a matter
of fact I am able to use again the admin tool version 6 without problem.

rm


Warren Baltimore wrote: 

        first off.  Try to do a full uninstall first.  You may need to
clean
        out your registry also.
        
        Second.  My mother taught me that if you cant say something
nice,
        don't say anything at all.  lets keep the snark down....  OK?
        
        On 4/14/08, Susan Palmer <[EMAIL PROTECTED]>
<mailto:[EMAIL PROTECTED]>  wrote:
          

                Biggest rule I was ever taught, which was reinforced
over and over and over
                again and has been given here over and over and over
.... was do NOT use an
                admin tool that is not the same version as ARS.  I guess
it really wasn't
                working fine was it?
                
                I think your name is just bringing out some of the worse
in me.  Maybe being
                less manic will save yourself time in the future.  Maybe
I just have more of
                backlog and can't play around and waste time.  I try to
learn from the list
                and all the information that people are gracious enough
to spend their time
                posting here.
                
                And as long as I'm ranting, maybe some of you need to
look in the
                documentation before asking questions.
                
                Susan
                
                On Mon, Apr 14, 2008 at 3:15 AM, Remedy Maniac
                <[EMAIL PROTECTED]>
<mailto:[EMAIL PROTECTED]> 
                wrote:
                
                    

                        dear listers,
                        
                        we have arsystem server 6.001 patch 1454.
                        Because of a migration plan, and in order to
test, I installed aradmin
                        Version 7.1.00 and is working fine against my
6.001
                        But since then any other aradmin tool (6.3 and
6.01) crashes when I try to
                        open a form.
                        
                        I can still check/manage licences. Also I can
read server info and so on.
                        Everything can be opened (AL, filters, ...)
                        
                        It's only when I try to open a form that I get
an error message such as:
                        
                        "The instruction at "0x04a7e833" referenced
memory at "0x00000044". The
                        memory could not be "read".
                        Click on OK to terminate the program
                        Click on CANCEL to debug the program"
                        
                        Any idea why that happens and how to get ride of
it. Because now that I
                        tested and saw the ARAdmin 7 I'd like to get
back to my previous aradmin.
                        
                        Many thanks
                        
                        rm
                        
                        
                        
                              

        
________________________________________________________________________
_______
                    

                        UNSUBSCRIBE or access ARSlist Archives at
www.arslist.org
                        Platinum Sponsor: www.rmsportal.com ARSlist:
"Where the Answers Are"
                        
                              

        
________________________________________________________________________
_______
                UNSUBSCRIBE or access ARSlist Archives at
www.arslist.org
                Platinum Sponsor: www.rmsportal.com ARSlist: "Where the
Answers Are"
                
                    

        
          


__Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"
html___ 

_______________________________________________________________________________
UNSUBSCRIBE or access ARSlist Archives at www.arslist.org
Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"

Reply via email to