Anne, I think you may be crossing things here. You want the service target attached to the ticket based on some different criteria (Priority, Support Group, for example). When you start talking time you might want to look at the Mile Stones and defining them from a stand point of time. It sounds like you are trying what we did and, that's how we did it.
We defined the Service Target to get attached to the Incident based on who the Support Group was as well as Priority (this was done in step 1 via the define terms and conditions) Step 2 we set the total time for the Service target to be 8 hours. Then we defined the Service Target Start Criteria (step 3 of 4) to fire based on Ticket Status > New and Assigned Group ! = NULL Stop Criteria was Status > resolved Step 4, is where you define the milestones, and we used Execute When* set to Hours & Minutes from Start and it that we specified 30 minutes. HTH Matt P. From: Action Request System discussion list(ARSList) [mailto:[EMAIL PROTECTED] On Behalf Of Ramey, Anne Sent: Friday, November 21, 2008 12:24 PM To: [email protected] Subject: SLM start when advise ** I need to start a service target based on time: ex. 30 minutes after a ticket was created. I can't seem to make this happen. It only goes from attached to In Progess if the ticket is modified. Help? Current criteria: ($\TIMESTAMP$ > ( 'Submit Date' + (30*60))) AND 'Status' < "Resolved" Anne Ramey *********************************** E-mail correspondence to and from this address may be subject to the North Carolina Public Records Law and may be disclosed to third parties only by an authorized State Official. __Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are" html___ _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"
