Adding to Fred's comments about IP Names... If I understand your description correctly you have a virtual IP for the AR Server farm called ARS_LoadBalancer with two AR servers in the farm (ARS1 and ARS2 I assume?).
The mid tier servers should only know of ARS_LoadBalancer (not the individual AR servers ARS1 and ARS2). These servers should have as their server name (in ar.conf or ar.cfg) ARS_LoadBalancer. I assume you have configured correctly session affinity in the load balancers. Best of luck Mark --- On Thu, 19/2/09, Grooms, Frederick W <[email protected]> wrote: > From: Grooms, Frederick W <[email protected]> > Subject: Re: What's wrong with this configuration > To: [email protected] > Date: Thursday, 19 February, 2009, 4:36 PM > Make sure that each ARS Server knows itself by both the > local server name and the load balancer nane > > In the ar.conf (ar.cfg for Windows) add the other names as > additional IP-Name entries. > Server-Name: ARS1 > IP-Name: ARS1.blabla.net > IP-Name: ARS_LoadBalancer > IP-Name: ARS_LoadBalancer.blabla.net > > Fred > > -----Original Message----- > From: Action Request System discussion list(ARSList) > [mailto:[email protected]] On Behalf Of Marek B. > Sent: Thursday, February 19, 2009 5:47 AM > To: [email protected] > Subject: What's wrong with this configuration > > Hi, > > Our environment consists of 2 ARServers with loadbalancer > and 2 MidTiers with a separate loadbalancer. > AR Server Setting for MT1 are: one entry for ARS1 and one > for ARS_LoadBalancer, MT2 the same respectively. > The settings for Preference Server, Data > VisualizationModule Server, HomePage Server, Authentication > Server are set to ARS1 > > The problem is if we go to the home page via > MT_Loadbalancer all the application links are doubled. > One link is for ARS1 and the second for ARS_LoadBalancer. > If I remove the ARS_LoadBalancer entry from MT1 the page > displays fine, but instead of this we got problem with > displaying flashboards when > entering via loadbalancer. > > > Static mappings of IP addresses for host names are as > follows: > host file for ARS1: > IP_of_MT1 MT1 > IP_of_ARS1 ARS_LoadBalancer > > host file for MT1: > IP_of_ARS1 ARS_LoadBalancer > > Please help me figure out what the correct configuration > should be to get rid of the annoying behaviour. > > regards, > Marek > > _______________________________________________________________________________ > UNSUBSCRIBE or access ARSlist Archives at www.arslist.org > Platinum Sponsor: RMI Solutions ARSlist: "Where the > Answers Are" _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: RMI Solutions ARSlist: "Where the Answers Are"
