Mark, Right, servers have Server-Name variable set to ARS_LoadBalancer. But when I set this as an only option in the midtier I'm getting a "ARERR [9388] Authentication failed" error while logging via web. And "ARERR [9280] Server not present in the configured servers list - ARS1 " while trying to display a flashboard from WUT. Something sill is messed up..
2009/2/20 Mark Gemmell <[email protected]> > Adding to Fred's comments about IP Names... > > If I understand your description correctly you have a virtual IP for the AR > Server farm called ARS_LoadBalancer with two AR servers in the farm (ARS1 > and ARS2 I assume?). > > The mid tier servers should only know of ARS_LoadBalancer (not the > individual AR servers ARS1 and ARS2). These servers should have as their > server name (in ar.conf or ar.cfg) ARS_LoadBalancer. > > I assume you have configured correctly session affinity in the load > balancers. > > Best of luck > > Mark > > > --- On Thu, 19/2/09, Grooms, Frederick W <[email protected]> > wrote: > > > From: Grooms, Frederick W <[email protected]> > > Subject: Re: What's wrong with this configuration > > To: [email protected] > > Date: Thursday, 19 February, 2009, 4:36 PM > > Make sure that each ARS Server knows itself by both the > > local server name and the load balancer nane > > > > In the ar.conf (ar.cfg for Windows) add the other names as > > additional IP-Name entries. > > Server-Name: ARS1 > > IP-Name: ARS1.blabla.net > > IP-Name: ARS_LoadBalancer > > IP-Name: ARS_LoadBalancer.blabla.net > > > > Fred > > > > -----Original Message----- > > From: Action Request System discussion list(ARSList) > > [mailto:[email protected]] On Behalf Of Marek B. > > Sent: Thursday, February 19, 2009 5:47 AM > > To: [email protected] > > Subject: What's wrong with this configuration > > > > Hi, > > > > Our environment consists of 2 ARServers with loadbalancer > > and 2 MidTiers with a separate loadbalancer. > > AR Server Setting for MT1 are: one entry for ARS1 and one > > for ARS_LoadBalancer, MT2 the same respectively. > > The settings for Preference Server, Data > > VisualizationModule Server, HomePage Server, Authentication > > Server are set to ARS1 > > > > The problem is if we go to the home page via > > MT_Loadbalancer all the application links are doubled. > > One link is for ARS1 and the second for ARS_LoadBalancer. > > If I remove the ARS_LoadBalancer entry from MT1 the page > > displays fine, but instead of this we got problem with > > displaying flashboards when > > entering via loadbalancer. > > > > > > Static mappings of IP addresses for host names are as > > follows: > > host file for ARS1: > > IP_of_MT1 MT1 > > IP_of_ARS1 ARS_LoadBalancer > > > > host file for MT1: > > IP_of_ARS1 ARS_LoadBalancer > > > > Please help me figure out what the correct configuration > > should be to get rid of the annoying behaviour. > > > > regards, > > Marek > > > > > _______________________________________________________________________________ > > UNSUBSCRIBE or access ARSlist Archives at www.arslist.org > > Platinum Sponsor: RMI Solutions ARSlist: "Where the > > Answers Are" > > > > > > _______________________________________________________________________________ > UNSUBSCRIBE or access ARSlist Archives at www.arslist.org > Platinum Sponsor: RMI Solutions ARSlist: "Where the Answers Are" > _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org Platinum Sponsor: RMI Solutions ARSlist: "Where the Answers Are"
