Thank you everyone! I will be testing this before I do in prod but I am glad the option is there!
-----Original Message----- From: Action Request System discussion list(ARSList) [mailto:[email protected]] On Behalf Of Mueller, Doug Sent: Monday, February 11, 2013 9:38 AM To: [email protected] Subject: Re: Turn on Filter Logs for a Time Frame You DO NOT need to do a signal or anything. Changing the logging mode through the ARSetServerInfo call (which is what the vendor form uses to interact with the server information) will change the mode immediately and dynamically. You do not need to do a server reset. So, as folks have shared with you, just set up an escalation against the Server Information vendor form and change the logging setting when you want to turn things on or off. By the way, you can do the same thing -- using escalations, using filters, using the API, using Web Services, ... -- to any of the server information settings that are exposed through this form. Be careful of some of the more involved ones (things like passwords and port settings) because the actual value is a formatted string with the UI pulling it out into table fields and then reformatting it for submission. If you go direct, you can change these values, but you need to do the formatting of things yourself. I hope this helps, Doug Mueller -----Original Message----- From: Action Request System discussion list(ARSList) [mailto:[email protected]] On Behalf Of Grooms, Frederick W Sent: Monday, February 11, 2013 8:22 AM To: [email protected] Subject: Re: Turn on Filter Logs for a Time Frame Easy ... Look to see if you have a form on your system of "Configuration ARDBC". That should be a vendor form of your server's ar.ini file. You can update the logging value thru a set fields or push fields action. Turning on logging means changing the value for where Name="Debug-mode". The only thing I don't remember off hand is if you then have to do an arsignal to have the server read the configuration settings Fred -----Original Message----- From: Action Request System discussion list(ARSList) [mailto:[email protected]] On Behalf Of Pargeter, Christie :CO IS Sent: Monday, February 11, 2013 9:55 AM To: [email protected] Subject: Turn on Filter Logs for a Time Frame ** Can I write an escalation that will turn on the filter logging? I want to catch one of my feeds that happens at 11:45 pm but I tend to be asleep at that time of day. I was wondering if anyone had written some escalations that would turn on logging then turn it off at a particular time. ARS 7.1 p 6 ITSM 7.0.3 p 9 Window 2003 MS SQ 2005 IIS/Tomcat RKM 7.2 p 4 MidTier 7.5 p 3 _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org "Where the Answers Are, and have been for 20 years" _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org "Where the Answers Are, and have been for 20 years" _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org "Where the Answers Are, and have been for 20 years"
