I was only able to get it to work with 32 bit perl.
2008/9/1 KOBORI Akii <[EMAIL PROTECTED]>
> I am troubled about next.
>
> ARSperl-1.91 compiled on RHEL5(x86-64) with option -m32.
> compiled success.
>
> However, ARS.so module was not loaded.
> The output error message is as follows.
> +---------------------------------------+
> Can't load
> '/usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi/auto/ARS/ARS.so
> ' for module ARS:
> /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi/auto/ARS/ARS.so:
> wrong ELF class: ELFCLASS32 at
> /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/DynaLoader.pm line 230.
> at /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi/XXXXXXX.pm
> line 56
> Compilation failed in require at
> /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi/XXXXXXX.pm line
> 56.
> +---------------------------------------+
>
> Please, I want you to teach a method to load(operate) ARS.so module.
>
> Regards
>
>
> > This is what I wrote some months ago to someone else (Geoffrey Endresen)
> > who appeared to have the same problem:
> >
> > ----------------------
> >
> > I don't have any experience with 64 bit systems so I can only take a
> > guess here. To me, the situation looks as follows:
> >
> > The Remedy API libraries are 32 bit, so ARSperl has to be compiled with
> > -m32.
> >
> > Your Perl interpreter is 64 bit, so ARSperl would also have to be
> > compiled as 64 bit, which of course collides with the condition above.
> >
> > A possible solution might be to compile a Perl interpreter with -m32 and
> > use that one for ARSperl.
> >
> > ----------------------
> >
> > He replied that he would try that, but I don't know if he was successful.
> >
> >
> > Regards
> > Thilo
> >
> >
> >
> > [EMAIL PROTECTED] wrote:
> > > Hi,
> > >
> > >
> > >
> > > I知 trying to compile ARSPerl 1.91on a 64 bit Redhat linux EL5 system.
> > > When I run make, it fails with the following error:
> > >
> > >
> > >
> > > [EMAIL PROTECTED] ARSperl-1.91]# make
> > >
> > > cp ARSarerrno-h.pm blib/lib/ARSarerrno-h.pm
> > >
> > > cp ARSnparm.pm blib/lib/ARSnparm.pm
> > >
> > > cp artypes.ph blib/lib/artypes.ph
> > >
> > > cp _h2ph_pre.ph blib/lib/_h2ph_pre.ph
> > >
> > > cp ARSar-h.pm blib/lib/ARSar-h.pm
> > >
> > > cp ARSnterrno-h.pm blib/lib/ARSnterrno-h.pm
> > >
> > > cp ARSnt-h.pm blib/lib/ARSnt-h.pm
> > >
> > > cp ARSOOsup.pm blib/lib/ARSOOsup.pm
> > >
> > > cp ARSOOmsgs.pm blib/lib/ARSOOmsgs.pm
> > >
> > > cp ARSOOform.pm blib/lib/ARSOOform.pm
> > >
> > > cp ARS.pm blib/lib/ARS.pm
> > >
> > > AutoSplitting blib/lib/ARS.pm (blib/lib/auto/ARS)
> > >
> > > /usr/bin/perl /usr/lib/perl5/5.8.8/ExtUtils/xsubpp -typemap
> > > /usr/lib/perl5/5.8.8/ExtUtils/typemap -typemap typemap ARS.xs >
> ARS.xsc
> > > && mv ARS.xsc ARS.c
> > >
> > > gcc -c -I/remedy/arheaders/remedy_7.01/api/include -D_REENTRANT
> > > -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement
> > > -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
> > > -I/usr/include/gdbm -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2
> > > -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64
> > > -mtune=generic -DVERSION=\"1.91\" -DXS_VERSION=\"1.91\" -fPIC
> > > "-I/usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/CORE" -g
> > > -Wno-unused-variable -Wuninitialized -DARS32 -DARS452 -malign-double
> > > -DPERL_PATCHLEVEL_IS=8 -DPERL_SUBVERSION_IS=8 -DPERL_BASEREV_IS=50
> ARS.c
> > >
> > > ARS.c:1: error: -malign-double makes no sense in the 64bit mode
> > >
> > > make: *** [ARS.o] Error 1
> > >
> > >
> > >
> > >
> > >
> > > I致e tried the two solutions below which were in response to a post by
> > > Chris Ford on 5/15/08. Neither worked.
> > >
> > >
> > >
> > > Solution 1:
> > >
> > > You can run both 32-bit and 64-bit programs on 64-bit linux. Compile
> > > arsperl 32-bit by setting the CPPFLAGS to include -m32:
> > >
> > > $ export CPPFLAGS="${CPPFLAGS} -m32"
> > >
> > > Axton Grams
> > >
> > > Solution 2:
> > > On Thu, May 15, 2008 at 7:33 PM, Rusty Copeland <[EMAIL PROTECTED]>
> wrote:
> > >> Chris,
> > >>
> > >> In the Makefile you could remove references to "-malign-double" which
> > > seems to be causing your problem. That may fix that problem but the
> fact
> > > you're compiling on a 64 bit system might cause other issues. Last I
> > > heard the Remedy libraries are only available as 32 bit libraries. I
> > > never had luck compiling ARSPerl on a 64 bit system. But perhaps that's
> > > changed.
> > >>
> > >> Rusty
> > >>
> > >
> > >
> > >
> > > Has anyone successfully compiled ARSPerl 1.91on a 64 bit system?
> > >
> > >
> > >
> > > Thanks
> > >
> > >
> > >
> > > --Wayne
>
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge
> Build the coolest Linux based applications with Moblin SDK & win great
> prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Arsperl-users mailing list
> Arsperl-users@arsperl.org
> https://lists.sourceforge.net/lists/listinfo/arsperl-users
>
--
-Geoff Endresen
Amazon.com
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Arsperl-users mailing list
Arsperl-users@arsperl.org
https://lists.sourceforge.net/lists/listinfo/arsperl-users
