Here is the box http://www.ohwr.org/projects/spec-box-1n/wiki
On 31 March 2016 at 15:57, Grzegorz Kasprowicz <kaspr...@gmail.com> wrote: > for this purpose one can use this board > http://www.ohwr.org/projects/spec/wiki > there is available also stand-alone aluminium box.The cost can be lowered > by factor of two when WR oscillators, PCie chip and memory is not mounted. > Just leave FPGA,supply and FMC connector. > Greg > > On 31 March 2016 at 14:48, Grzegorz Kasprowicz <kaspr...@gmail.com> wrote: > >> Well, yes, providing that you find charger that won't fail after 500 hours >> :) >> >> >> -----Original Message----- >> From: Sébastien Bourdeauducq [mailto:s...@m-labs.hk] >> Sent: Thursday, March 31, 2016 12:42 PM >> To: Grzegorz Kasprowicz <kaspr...@gmail.com> >> Cc: Slichter, Daniel H. (Fed) <daniel.slich...@nist.gov>; Robert Jördens >> <r...@m-labs.hk>; Grzegorz Kasprowicz <gkasp...@elka.pw.edu.pl>; Leibrandt, >> David R. (Fed) <david.leibra...@nist.gov>; artiq@lists.m-labs.hk >> Subject: Re: [ARTIQ] TTL + slow DACs >> >> On Thursday, 31 March 2016 12:40:55 PM HKT Grzegorz Kasprowicz wrote: >> > Well, we can use in this case the AMC board plugged into dual AMC box >> > which has 4 SFPs. >> > In some cases this could be an overkill, but it is working solution. >> > http://www.ohwr.org/projects/amc-ubackplane-sfp/wiki >> >> A Spartan-6 FPGA powered by a mobile phone charger is sufficient. >> >> >> >
_______________________________________________ ARTIQ mailing list https://ssl.serverraum.org/lists/listinfo/artiq
