I was about to email out for quotes from Creotech and Technosystem for the FMC -> VHCDI boards. It sounds like Joe wants ~2x, we want 2x, and @Tom, I'm guessing you guys want at least 2x as well... that puts us in the qty 6-10 range.
If we can bulk the order, that should bring the price down a little. Talking to the accounts people here, it sounds like it is "nearly impossible" to bill groups outside UMD (ie, to put 10x boards on a single PO through UMD, then re-arrange monies afterwards), but hopefully either of those companies will quote us with the assumption/promise that each group will pay for their quantity separately...? If you guys have any other ideas, let me know. Neal On Fri, Mar 10, 2017 at 8:58 AM Grzegorz Kasprowicz via ARTIQ < [email protected]> wrote: I already received assembled 3U boards including VHDCI carrier and BNC IO. So we can test whole setup in the lab quickly. You can help us with simple HDL design for KC705 that i.e. toggles IOs or makes loopback: ttl->lvds->VHDCI-> FPGA-> VHDCI->lvds->TTL. At the moment we are so occupied with other tasks that every help is very valuable. Greg On 10 March 2017 at 14:33, Thomas Harty <[email protected]> wrote: > It is compatible with VHDCI carrier - I used the same pinout. Thanks for confirming that. In that case, we'll have a few of these made up, and plan to use them with the KC705 + VHDCI carrier as a short-term solution. -----Original Message----- From: ARTIQ [mailto:[email protected]] On Behalf Of Thomas Harty via ARTIQ Sent: Friday, March 10, 2017 12:56 PM To: [email protected] Subject: Re: [ARTIQ] ARTIQ Digest, Vol 34, Issue 3 > ..., and we might spin up some in-house boards for multichannel DAC over SPI. FYI, the Zotino and Novogorny DAC/ADC EEMs are now funded (Oxford/Freiburg) and being designed by WUT. They should be ready in ~12weeks. We're planning to contract M-Labs to provide full support for them. The draft specifications are on the Wiki at https://github.com/m-labs/sinara/wiki feel free to comment on them if you have requests/questions. > What adapters in particular? http://www.ohwr.org/projects/fmc-vhdci? @Greg, can you confirm whether this is compatible with the VHDCI carrier? _______________________________________________ ARTIQ mailing list https://ssl.serverraum.org/lists/listinfo/artiq _______________________________________________ ARTIQ mailing list https://ssl.serverraum.org/lists/listinfo/artiq
_______________________________________________ ARTIQ mailing list https://ssl.serverraum.org/lists/listinfo/artiq
